Microgravity environments improve the success of 3D bioprinting

Microgravity can alter the evolution of viruses and bacteria

Experiments conducted on the International Space Station have shown that microgravity environments can delay viral and bacterial infections and induce mutations not seen on Earth. These mutations could have implications for long-term space missions and human health and suggest space can serve as a testing ground for developing new therapeutic approaches.

Microgravity environments reduce muscle mass and bone density

Muscles that assist with balance and resistance to gravity are not subjected to their usual workload on the International Space Station. See the type of exercises that astronauts must complete for roughly two hours daily and learn why these movements are necessary to preserve astronauts' muscles, bones, and cardiovascular health.

How 3D printing inside cells paves the way for microscopic machines

In 2026, scientists in Slovenia developed a method to 3D print a small elephant, several microscopic geometric objects, and barcodes for cell labeling within living human cells, which continued to grow and divide thereafter. The experiment opens the door to fabricating devices within cells to study and manipulate cellular functions.

Medical imaging allows 3D printers to create patient-matched devices

With imaging data on a person's anatomy, external prostheses and implants, such as cranial plates or hip joints, can be custom-printed to better match a patient's body. Fabrication of porous structures can promote bone growth, leading to longer-lasting implants.

Drugs in space: the pharmacy orbiting the Earth

Researchers are developing pharmaceutical solutions for astronauts, whose bodies may not respond the same way in space as they would on Earth. Similar to how microgravity causes changes to astronaut physiology, the environmental shift enables new...

Technologies developed for the ISS have brought benefits to people on Earth

About 93% of water used onboard the International Space Station is recycled through filtration and purification systems that have since been used in regions lacking access to clean water. Treatments to mitigate bone loss and muscle atrophy in astronauts can also help aging adults.

As of 2025, perfect synthetic replication of natural organs remains elusive

Advancements such as 3D printing muscles, performing vaginal reconstruction with colon tissue, and growing organs in a lab have shown promise, but artificial options and transplanting substitutions continue to exhibit functional and performance limitations compared to their natural equivalents.

NASA funded research into creating pizza with a 3D printer

The agency awarded a contract for the development of devices that can create edible structures from long-lasting dry powders when mixed with liquids or pastes. By delaying this integration until the time of consumption, food could last longer than the current six-month expiration of freeze-dried meals for Mars expeditions.

The benefits of 3D printing batteries, from safety to sustainability

Rather than using the liquid electrolyte commonly found in lithium-ion batteries, 3D-printed batteries would use a solid layer, which can be custom-built into different shapes, deliver higher energy density by building thinner layers, and be fabricated with fewer raw materials compared to injection molding.

Watch the engineering challenges overcome in turning a 3D printer into a tattoo machine

The DIY project required reprogramming the printer to operate on a curved, 2D surface rather than making flat layers in 3D, editing replacement firmware to bypass temperature safety checks, and developing a rapid system to stop the tattoo in case of an emergency. The final product printed "LEG" on a volunteer's leg.

Astronauts have repaired genetic damage in space using CRISPR—a molecular tool that can make precise changes to DNA and is used in single-celled organisms to attack invasive viruses.

Massive 3D printers have been used to build homes by stacking layers of 'concrete toothpaste,' a fire-resistant material that effectively insulates against outside noise.

Multi-material 3D printing produces filament waste if only one nozzle is used

When swapping between colors or materials in a fused deposition modeling system, a considerable amount of filament is purged from the nozzle before introducing a new filament. Filament extruders can create new filament from purged elements, but the device combines colors and produces filaments of inconsistent diameter.

How to make a burrito in space

Just because you’re living at the International Space Station doesn’t mean your cravings disappear. In this video, Chef Traci Des Jardins explains the best way to make a burrito while experiencing microgravity.

Gravity assists are crucial for space travel beyond Mars

By traveling near a moving celestial object, a passing object can gain or lose speed and change direction due to the acceleration provided by their mutual gravity. Some missions are planned around spacecraft performing multiple assists, or slingshots, to reduce fuel requirements for long-distance travel.

Understanding why suction cups rely on Earth's atmosphere to work

When pressed against a surface, air is squeezed out of a sealed volume, causing the internal pressure to drop below the surrounding atmospheric pressure, and this imbalance creates the "sticking." For this reason, astronauts do not use suction cups or related technologies to stay on spacecraft during spacewalks.

The 3D-printed rocket maker competing with SpaceX

Producing rockets cheaply and at scale may require atypical manufacturing processes like those developed by Relativity Space, a 3D-printer of rockets. Relativity hopes to not just compete with, but beat, SpaceX in the race to get the first...

Objects can be 3D printed with light by projecting 2D computerized tomography (CT) scans onto rotating cylinders of resin, which solidify upon exposure.

Learn how environmental conditions are optimized to increase bioremediation efficacy

Through biostimulation, Indigenous microbes are provided with moisture, nutrients, or oxygen to prevent their death and ensure optimal progression of their biochemical reactions. Bioaugmentation can introduce new microbial cultures to target specific compounds not natively found in the environment, while landfarming can spread or aerate contaminated soil to improve access to contaminants.

Watch a time-lapse of 3D printing a Groot figurine

The total printing time on the Prusa i3 MK2 printer was 12 hours and 32 minutes, with the head alone taking nearly 5 hours to print from layering plastic filament.

What is gravity made of?

Our world at very small scales is governed by quantum mechanics, in which forces and energy come in discrete packets. At large scales, our world is governed by gravity, which moves the planets and stars and can create waves in spacetime. To merge...

Artificial coral reefs have been 3D printed from nontoxic, biodegradable terracotta clay, which coral polyps have used as a foundation for rebuilding marine ecosystems.

The challenges of trying to study microplastics in microplastic-abundant labs

The presence of microplastics in instruments, surfaces, and air has made accurate measurement of their levels in lab samples difficult, given the high likelihood of contamination. While the use of stainless steel tools in a sealed, clean lab may reduce accidental exposure, existing methods can misidentify biological substances, such as fat, as plastics, further complicating research.

How water pressure affects the body

The extreme conditions of the deep sea include increasing amounts of pressure as explorers and organisms descend into its depths. The major danger for both fish and humans is the way pressure changes how body tissues absorb chemical molecules...

Stereolithography uses light to fabricate objects in layers via chemical reactions

Specific locations in a tank of light-sensitive liquid resin are exposed to projected light, causing them to cure onto a build platform. The resulting cross-section of hardened plastic is moved slightly away from the light source, exposing it to resin once more, and the process repeats to produce successive layers.

A prototype greenhouse for Biosphere 2 is now part of a test habitat for Mars

The Space Analog for the Moon and Mars combines the Test Module greenhouse with a workshop, kitchen, common area, sleeping quarters, and a yard that mimics lunar and Martian surfaces. A blind crew member in SAM’s first mission, Inclusion I, helped assess accessibility in potential future space habitats.

Artificial wombs and preterm births: an overview

Scientists are working to create artificial wombs that would help preterm babies survive their early entry into the world. But how much help could this technology provide, and how much of a problem are preterm births? This article details some of...

Why space resource extraction companies are racing to harvest lunar helium

Without a magnetic field to deflect it away, helium-3 from solar wind has accumulated on the lunar surface over billions of years in significant quantities. With a reported value of $20M per kilogram because of its potential use in clean nuclear fusion, harvesting of helium-3 may form the basis of a future lunar economy.

Lasers have been used to create natural adhesives for paper

German researchers at four Fraunhofer institutes have developed a method to seal paper packaging using a carbon monoxide laser. Without the need for glue or plastic adhesives, the Papure project is expected to improve the recyclability of paper. (Some readers may experience a paywall.)

As of 2025, the most cited papers in science include a review of graphene, methods to improve image recognition, streamlining electron density calculations, and optimizing protein studies.

According to the physics of black holes, our 4D reality may be a hologram—a projection of information coded on a 2D surface on the edge of the universe.

Telehealth demand for GLP-1s for weight loss is booming as consumers seek easier access.

After 25 people used virtual reality headsets to practice flying with virtual wings—flapping their arms—their visual cortex responded to the wings almost as if they were real arms, treating them as body parts.

Bone marrow (soft tissue found inside certain bones) generates roughly 500 billion new blood cells each day

Studies suggest when you sleep is as important as how much you get, and syncing with your circadian rhythms may lead to less fatigue and improved long-term health outcomes

Read a deep dive on the 'all-purpose healing' peptide BPC-157.

The first line of 'immortal' human cells, which can divide indefinitely and are used in scientific research, was nonconsensually taken from a Black woman.

While the sun's gravity keeps the planets in orbit, their gravity also pulls on the sun, causing it and everything else in the solar system to orbit around a mutual balance point called the barycenter—the true center of the solar system.

Tattoos remain visible on your skin thanks to immune cells called macrophages

Apollo astronauts left items in the moon's 'toss zone,' including golf balls, family photos, and bags of human waste, to make room for lunar rocks.

About 2,000 US babies are born annually without some portion of their limbs, potentially leading to a lifetime of pricey prosthetics.

Watch how deep-sea mining equipment collects and processes polymetallic nodules—metal-rich, potato-shaped rocks—from the ocean floor and creates environmentally damaging plumes of sediments.

SpaceX's S-1 or 'prospectus' revealed many previously unknown details about the company, including its unprofitability despite doing $18.7B in revenue in 2025, exactly how many voting shares Elon Musk will have in the company (roughly 85%), and more.

Double world record holder Hunter Ewen helped conquer his fear of balloons, called globophobia, by training to win Guinness World Record titles for balloon inflation.

To reduce wrinkles in clothing, research recommends gentle wash cycles with more water and tumble drying with smaller loads and longer times.

Against his wishes, Albert Einstein's brain was removed before his cremation, and the pathologist responsible stored it for decades in mason jars within a beer cooler.

Children are now three times more likely to say they want to be a YouTuber when they grow up than an astronaut, with some even attending 'YouTube camps' that teach kids how to create content for the platform.

The boiling temperature of water decreases with increasing elevation because the molecules need less energy to overcome the lower atmospheric pressure associated with thinner air.

Fear or disgust related to clusters of holes and cracks, called trypophobia, may stem from evolutionary processes to help us avoid pathogens.

Explore what it's like inside a patient isolation unit, used in situations such as treating a patient or suspected patient with Ebola.