Lasers result from electrons in a material's atoms being excited into a higher-energy, metastable state and then dropping back down, producing identical particles of light.

Photons emitted via stimulated emission have identical characteristics

When confined to a pair of mirrors, a single photon passing a region of population-inverted atoms can produce a chain reaction of monochromatic light. This chain reaction amplifies the initial photon, from which lasers get their name: light amplification by stimulated emission of radiation.

Lasers are classified based on their gain medium and mode of emission

All lasers possess a material whose atoms must be energized by a power source, such as electricity or chemical reactions. Different media will produce different colors of light through a cascade of emissions resulting from an initial stimulated emission.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

Random lasers can be created from biomaterials, such as peanuts and birch leaves

Rather than creating a narrow beam of light via amplification in an optical cavity, the random laser produces a red glow by scattering photons created in the natural pores of a peanut kernel after it has been injected with a solution of light-generating carbon dots derived from birch leaves.

Lasers can be used to reduce the motion of atoms because particles of light—photons—can collide with particles of matter, as billiard balls do, to slow them down.

Lasers, semiconductors, medical imaging, and atomic clocks rely on quantum mechanics

Semiconductors, crucial in electronics, operate based on quantum superposition. Lasers use stimulated emission, a quantum process, and MRI machines leverage the quantum spin of hydrogen atoms for imaging. Atomic clocks measure time with unprecedented precision using quantum transitions.

Lasers help build the layers of circuit components in microchips

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

A laser energy system has allowed scientists to achieve fusion ignition

In 2022, scientists used lasers to create a powerful implosion that bound hydrogen isotopes together, releasing more energy than was input into the system. Research is ongoing to achieve this self-sustaining reaction with larger yields and energy gains.

Chromium contaminants in a ruby crystal gave the world's first laser its red color

The red light originates from a long-lasting excited electron state in the element's atomic structure. The brittle gray metal has historically been used in pigment production, the manufacturing of rust-resistant stainless steel, and the creation of durable coatings with long-lasting shine for metals, wood, and leather.

Scientists create movies of subatomic phenomena using X-ray free-electron lasers, in which images are produced by striking matter with high-intensity light created by accelerating electrons.

Through sonoluminescence, concentrated sound waves can produce short, high-intensity flashes of light by rapidly collapsing microscopic bubbles to temperatures up to twice that of the sun's surface.

The different energy levels of each element result in unique colors when burned

When heated, electrons absorb energy and move to excited states within an atom. They promptly drop back down and release light energy corresponding to the size of the drop, which is unique to each element.

Fiber lasers used for metal engravings can’t burn your skin

These devices use diodes and mirrors to create pulses of light that vaporize metal in billionths of a second, though at wavelengths that cannot react with organic material. Pulse width, power, and speed adjustments can produce white, black, and even colored patterns through controlled heat reactions.

Despite the visibility of lasers in space battles within science fiction, they are impossible to see in outer space unless they are pointed directly at an observer.

While associated with digital storage and the reading of CDs, DVDs, and Blu-ray technologies, lasers are widely used in industrial, medical, military, and retail settings.

According to the equivalence principle, objects in a closed space cannot tell the difference between whether they are accelerating or experiencing a uniform gravitational field.

How helium greatly improves the efficiency of barcode-scanning lasers

Rather than directly energizing neon atoms, electrical discharge at lower, more practical power levels can excite helium atoms to energy levels nearly equal to those in neon atoms. Within a helium-neon laser, these gases are present in a 10-to-1 ratio, enabling helium to efficiently transfer energy to neon, which is then discharged as red light.

Holograms are produced by shining light through recordings of interference patterns

When one half of a split laser beam that was reflected off the surface of an object recombines with its other, unreflected half, the two produce an interference pattern that becomes etched onto holographic film. When light shines through the back of the film, it reacts with the pattern to create the reflected light, projecting the original object.

View an animation of how certain chemicals fluoresce—that is, emit visible light after having absorbed higher-energy light, such as ultraviolet radiation.

The origin of LASIK eye surgery, from a lab incident to federal funding and widespread use

After a University of Michigan engineering student suffered retinal burns from an ultrashort pulse laser, researchers realized it could be used to reshape the cornea and improve a person's vision with greater precision than a scalpel and earlier laser technologies. Agencies, including the National Science Foundation, the National Institutes of Health, and the Department of Energy, provided funding to develop and commercialize the procedure.

Light echoes are expanding shells of reflected starlight

Just as sound waves reveal the location of obstacles by reflecting off them, pulses of light emitted by stars illuminate rings of interstellar dust, giving the appearance of ejected material as the light travels outward.

Cathode-ray tube televisions are examples of electron accelerators

CRT TVs work by converting electricity into heat, which causes electrons to be emitted from the rear of the device in three beams responsible for the colors red, green, and blue. Electromagnets direct electrons to phosphor molecules on the screen, which emit light and illuminate the pixels.

How scientists determine elemental composition based on the light emitted by cooling atoms

When electrons within an atom drop to a lower energy level closer to the nucleus, they lose energy and produce light with energy equal to the difference between the two energy levels. Because these levels and the corresponding emitted light are unique to each element, the light serves as a unique signature that can be compared to known lab samples for identification.

Light appears to slow down as it travels through different materials

As electromagnetic waves interact with particles in a transparent medium, particles vibrate and generate their own electromagnetic waves. The interference of the original and generated waves, which are slightly delayed, results in ensemble light with an effective slower speed but unchanged color.

As of 2023, the world's smallest particle accelerator is smaller than a penny

The prototype is an example of a photonic accelerator, which utilizes tiny lasers to accelerate electrons rather than relying on oscillating electromagnetic fields to move them. It can deliver about 1 electron per second with energies equivalent to those found in cathode-ray tube televisions.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

Solar sails use light as a means of propulsion

Photons possess momentum and can transfer it to objects they strike or bounce off, imparting radiative pressure, or a light-based force over a small surface area. Lasers fired at observational equipment with specially designed sails can theoretically use this mechanism to accelerate up to 20% the speed of light.

Laser skin treatments can promote the production of collagen

Skin resurfacing vaporizes the top layer of skin to reveal healthier, new skin, while collagen can give the skin structure and elasticity. Such procedures treat scars and burns, but may leave light spots on the skin.

At the Large Hadron Collider, protons are accelerated so close to the speed of light that they would lag behind a laser by just 10 feet after 14 minutes of travel.

How to cook food with lasers

Creative Machines Lab at Columbia Engineering have developed a system of software-controlled lasers to cook food with precision, retain moisture with the final-cooked product, brown food within its original packaging, and create an entirely new meal creation process for a consumer. Watch this three-minute video to see for yourself.

Laser-etched electric charges guide toner during laser printing

When sending a print job, the file data generates an image that a laser maps positively charged regions onto a drum separately for each color toner. Once the negatively charged toner is applied where it was electrically attracted, heat and pressure fuse it onto the paper.

Scientific applications of bubbles include logic gates, laser production, and medical imaging

Microbubbles of nonreactive gas can be administered to improve the reflection of sound waves and the resulting imaging during an ultrasound. Bouncing light waves within a bubble can stimulate emission of light from a trapped chemical, just as occurs within a laser, and bubbles can act as valves that control the flow and reaction rates in microfluidic systems.

The reflection of light within a material is the basis for fiber optics

As light travels from one material to another, it can be absorbed, reflected, or transmitted through, depending on the properties of the two materials. Fiber optic cables are designed to reflect light internally, minimizing data loss as information is sent at high speeds through flashes that represent zeros and ones.

Particle accelerators propel matter toward small targets at high speed

Devices like cathode-ray tube televisions were once basic particle accelerators, but modern ones, such as the Large Hadron Collider, use massive magnetic fields and circular tunnels to achieve energies high enough to recreate the conditions just after the big bang.

Glow sticks feed energy released in chemical reactions to fluorescent dyes

When bent, the glass tube inside the stick breaks, releasing hydrogen peroxide into the surrounding solution. The ensuing reaction creates unstable molecules that decompose and release energy, which is then absorbed by molecular dyes that emit light when their excited electrons return to lower energy states.

Rather than measuring the rising and falling of the sun or pendulum swings, optical clocks track the passage of time using the vibrations of atoms.

A nuclear reactor's characteristic blue light is produced from superluminal particles

When light travels through water, its effective speed is 25% lower than its speed in a vacuum. Just as sound waves bunch up and produce a sonic boom when objects move faster than the speed of sound, particles moving faster than this reduced speed generate a shock wave of light, visible as a blue hue.

Solid neon mirrors help trap single electrons to create stable quantum bits

Researchers created this new unit of information for a quantum computer by trapping a single electron near the surface of solid neon. The electron was held in its quantum state by attraction to its mirror image.

Photons are both particles of light and messengers of the electromagnetic force

Einstein's model of light as a wave and a massless particle of energy revolutionized physics, and scientists' application of the model led to groundbreaking technologies, including medical imaging and treatments, telecommunication signals, and probes of the quantum and cosmological realms.

Laser disc technology stores binary data in etched pits and lands

The pits are dips in the LaserDisc, CD, DVD, or Blu-ray surface that do not reflect the laser from the optical drive back to the photoelectric cell, resulting in a coded zero. Lands are reflective plateaus on the surface that code for a one.

Cosmic rays are thought to be accelerated to near the speed of light by repeatedly bouncing across shockwaves produced by high-energy cosmic events, such as supernovae.

Nuclear fusion, where the nuclei of two atoms are combined, can produce near-limitless clean energy, but requires extreme conditions to kickstart because of the natural repulsion of atomic nuclei.

Before 1932, when particle accelerators were first used for nuclear research, scientists relied on naturally radioactive substances to advance their understanding of the atomic nucleus.

How lasers have become a go-to in archaeology

Archaeological teams now have another item to pack with their trowels: Lasers. Researchers' approach to unsurveyed land has been transformed by light detection and ranging technology. LiDAR has helped archaeologists break new ground and uncover...

What are pulsars?

Pulsars are neutron stars created as part of stellar evolution and emit radiation beams visible from Earth. These beams pulse like a lighthouse's light due to the star's rotation, creating periodic high-energy emissions. Pulsars were first discovered as radio sources; it was also discovered they emit gamma rays. NASA uses its Fermi Gamma-ray Space Telescope to retrieve and analyze data from pulsars.

A beam of neutrinos can be created by firing a beam of high-energy protons at a target to produce unstable particles that decay into neutrinos.

Lichtenberg figures capture lightning-like patterns within insulators

When high-energy electrons from particle accelerators are fired into materials like acrylic, they form a charged plane before discharging into scarred patterns within the material. By evenly charging a cylindrical bottle through rotation during the irradiation process, a 3D figure of lightning in a bottle can be created.

Scientists have diverted the path of lightning using lasers

A proof of concept for a laser protection system, which could be used to protect launchpads and airports in the future, was conducted on the Säntis mountain in northeastern Switzerland. Rapid laser pulses heated air molecules, creating a more conductive, 50-meter (164-foot) path for the electrical discharge to travel through.

Leptons do not experience the strong nuclear force that binds quarks together

Particles like electrons can exist in isolation, enabling them to move more freely. Within circuits, this allows electrons to carry energy across wire surfaces quickly. Contrastingly, light created in the sun's core is delayed by a million years on its way to Earth due to collisions with free electrons.

Depictions of antimatter in science fiction include misleading portrayals of it coming from parallel universes, being mined from asteroids, and serving as a workable laser beam.