Lichtenberg figures capture lightning-like patterns within insulators

Watch lightning strike a building at 40,000 frames per second

When the built-up layer of negative charge at the bottom of clouds is sufficiently high, a network of charge filaments will emerge. If one of the filaments meets a rising strand of positively charged particles, a highly conductive path forms, and charges across all filaments move to the path, generating lightning

Lightning forms when streams of rising and falling charged particles connect

In cloud-to-ground lightning, a buildup of negative charge at the bottom of clouds repels electrons on Earth's surface, leaving behind positively charged particles. When descending negatively charged air—the stepped leader—meets rising positively charged particles—the upward streamer—brightening runs up the connection, producing intense flashes known as return strokes.

Lightning bolts are about as thick as a garden hose

The conductive filament ranges from about 2.5 to 5.0 centimeters (1 to 2 inches), though its extreme brightness makes it appear much thicker and visible from miles away. Scars on individuals who suffer a direct strike produce Lichtenberg figures with similar maximum thickness.

Research shows that cosmic rays may trigger the cascade of displaced electrons needed to produce lightning, which is also enabled by pointed ice crystals that create strong electric fields.

The characteristic zigzag of lightning originates from columns of conductive oxygen

Energized electrons from the base of clouds collide with oxygen molecules, placing them in a "singlet delta state," which makes the air conductive. Collisions continue until more than 1% of nearby oxygen is in this state—about 0.00005 seconds—matching the electrical potential of the cloud and propogating electricity in a 50-meter "step."

Lightning is the sudden flow of electricity in the atmosphere as two oppositely charged regions seek to become balanced via the movement of electrons.

Some scientists hypothesize that stressed rocks can discharge built-up static electricity in the form of lightning—a phenomenon known as fracto-luminescence, or earthquake lights.

View the various types of lightning

The most common form of lightning involves channels of electricity between oppositely charged regions within a cloud or between two clouds to reestablish electrostatic equilibrium. While cloud-to-ground lightning is understood best, research is ongoing to fully model the mechanisms behind rarer forms of lightning, such as transient luminous events.

Fulgurites are glass sculptures made by lightning vaporizing sand

Sometimes referred to as fossilized lightning, these tube-like structures are formed when high-temperature electrical currents fuse mineral grains into crystals, which can feature branching patterns resembling filaments of current. Their name derives from "fulgur," the Latin word for lightning.

Scientists can create movies of atomic and molecular phenomena using X-ray free-electron lasers, in which images are produced by matter being struck by high-intensity light created by accelerating electrons.

In an X-ray free-electron laser, electromagnetic fields are used to accelerate and move electrons in wiggling patterns, causing them to emit synchronized, high-energy X-rays. This resulting light beam can strike targets up to 120 times per second to create movies of changing molecular structures and phenomena.

Stimulating electrons to emit identical photons produces lasers

This effect was predicted by Albert Einstein in 1917, and requires all excited electrons in a material to exist in the same excited metastable state within their atoms. Pumping all atoms through the same mechanism, such as electricity or flash lamps, can create this environment.

Understanding ball lightning remains an area of active research

Observations of glowing orbs of light that appear during or after thunderstorms have been documented since at least the 12th century, but their rarity and short lifetimes have made their study challenging. Some theories suggest they form when lightning vaporizes pockets of gases in the air or certain materials on the ground.

Lightning rods provide a conductive pathway to safely steer massive electric currents

The device is positioned higher above the ground to "catch" one of the many branching filaments of electrons from clouds before they make contact with other surface structures, which have been induced to have a positive charge by overhead storm clouds. The current is then sent to a conductive grid buried underground.

Planeterrellas create artificial auroras that mimic the atmospheric displays of light by setting up an electric field between two metal balls in a jar filled with a small amount of air.

Learn how to build your own cloud chamber to detect cosmic rays—particles from space that move near the speed of light—at home.

Scientists have diverted the path of lightning using lasers

A proof of concept for a laser protection system, which could be used to protect launchpads and airports in the future, was conducted on the Säntis mountain in northeastern Switzerland. Rapid laser pulses heated air molecules, creating a more conductive, 50-meter (164-foot) path for the electrical discharge to travel through.

Dirty lightning is a thunderstorm created from friction between rising and falling flows of ash and smoke during volcanic eruptions.

Colorful thunderstorm phenomena can be viewed from the International Space Station

Transient luminous events are lightning-related phenomena that occur in the atmosphere above storm clouds. These events often look like columns of red light resulting from electrical discharge, but may also appear as purple tendrils or long blue jets.

Stereolithography uses light to fabricate objects in layers via chemical reactions

Specific locations in a tank of light-sensitive liquid resin are exposed to projected light, causing them to cure onto a build platform. The resulting cross-section of hardened plastic is moved slightly away from the light source, exposing it to resin once more, and the process repeats to produce successive layers.

Artificial lightning can improve the yield of shiitake mushroom growers

Researchers have found that shockwaves produced from lightning strikes homogenously break internal filaments called hyphae, transitioning the mushrooms from a vegetative growth to a fruiting phase. Repeated minor shocks near mushroom logs mimicked this effect.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

Through sonoluminescence, concentrated sound waves can produce short, high-intensity flashes of light by rapidly collapsing microscopic bubbles to temperatures up to twice that of the sun's surface.

Cosmic rays can be detected using cloud chambers—containers where alcohol vapor condenses around trails of ions created by these high-speed particles from space.

The air around lightning can be five times hotter than the sun's surface

The rapid discharge of electricity—flowing electrons—between oppositely charged regions across a narrow filament can raise temperatures to 30,000 degrees Celsius (54,000 degrees Fahrenheit). If lightning strikes a tree, the speed of the temperature spike can almost immediately turn all its water into pressurized steam, causing it to explode.

Lasers help build the layers of circuit components in microchips

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

Track lightning strikes around the world

The Blitzortung platform triangulates the positions of this phenomenon from stations that detect atmospheric interference in low-frequency signals that are characteristic of lightning strikes. A network of nearly 2,000 stations transmits the required data to a central server, where its software performs these calculations and generates the subsequent visualization.

Simulate the buildup and discharge of static electricity through friction by dragging the arm and leg of 'John Travoltage' along surfaces.

In 1880, Jacques and Pierre Curie discovered that electricity could be produced by striking certain materials—the piezoelectric effect—a phenomenon that is seen in barbecue lighters.

Dust particles on Mars can generate lightning

Through triboelectric charging, sand and dust on the Martian surface can become electrified when they rub against one another, causing friction to displace electrons and create charged particles. If this matter forms a strong enough electric field, it can overcome atmospheric insulation and produce electrical discharges, resembling lightning on Earth.

Particle detection has evolved from cloud and bubble chambers to digital 3D displays

As invisible particles passed through cloud and bubble chambers, they disrupted supersaturated vapor and superheated liquid, respectively, creating trails that served as proxies for cosmic rays. The transition from photographed events to digital sensors enhanced data collection and accuracy.

Every day, lightning releases several Hiroshima bombs' worth of energy into the atmosphere

If all this lightning struck one location at once, the bolt would be the diameter of the center circle of a basketball court, turning the entire court into a crater. Its heat would ignite surfaces for miles around, and its shockwave would demolish buildings.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

Explore the components of the linear particle accelerator at Los Alamos

Located at the site of bomb design and development for the Manhattan Project, LANSCE features an injector system for hydrogen ions, a series of tanks with alternating electric fields for proton acceleration, and an isotope production facility that creates radioisotopes for medical treatments.

Spikes of light around stars are artifacts of light bending around the mirror supports

Through diffraction, electromagnetic waves can bend around obstacles, as observed in the silver linings at the edges of clouds, where light should be blocked. Within reflecting telescopes, starlight diffracts around struts—beams holding a secondary mirror in place—and spreads perpendicular to them, creating pairs of spikes.

Antimatter can be created from dark lightning—high-energy light emitted by deflected electrons after they are accelerated to near the speed of light by thunderstorms.

By igniting flammable gas in a tube filled with holes and playing music into it, the fire will take the shape of the sound waves, enabling the visualization of audio.