Electricity is produced when the ends of a battery are connected by a conducting wire, triggering chemical reactions that release the energy stored in chemical bonds.

During manufacturing, lithium-ion and alkaline batteries are tested for short-circuiting

Lithium-ion batteries are made by manufacturing anodes, cathodes, and electrolytes via chemical processes, assembling these components into cells, and enclosing multiple interconnected cells within a protective casing. Disposable alkaline battery production involves filling steel containers with preforms—rings of powdered cathode material—paper-based separators, electrolyte solution, and an anode gel.

Gradual chemical build-up reduces the effectiveness of rechargeable batteries

During charge cycles, small chemical deposits gradually form a film on the electrodes where they make contact with the electrolyte, trapping ions that would otherwise facilitate the flow of electricity. Mechanical degradation from electrode wear and electrical shorting from structural instability can also reduce battery capacity.

Thermal runaway reactions can cause batteries to catch fire or explode

If a lithium-ion battery is heated, punctured, crushed, or short-circuits due to manufacturing flaws or degradation, the cathode and anode can make contact without the resistance provided by a circuit. The ensuing spike in chemical reactions increases the temperature and can release oxygen, initiating and intensifying burning of the battery's interior.

Watch how metals are extracted from rechargeable devices during recycling

Recyclable batteries found in cars, phones, power tools, and other electronics contain lithium, cobalt, nickel, and other precious metals, whose reuse generates 70% fewer emissions than during their initial mining. Upon shredding these devices, a filter press squeezes the pieces through a proprietary fluid, which separates them for future reuse.

Visualize the minerals used in a lithium-ion battery

The lithium cathode includes nickel to increase energy storage per unit volume, as well as cobalt and manganese as stabilizing agents. Anodes are composed entirely of graphite, with aluminum and copper composing the current collectors for the cathode and anode, respectively. The battery is enclosed in a steel casing.

Explore options for recycling batteries

Improper battery disposal can lead to fires and the leaching of harmful chemicals and toxic materials into local soil and water systems. Although many batteries contain metals that can be recycled with less energy than it takes to produce them, variability in regulations across municipalities and states can complicate efforts. (Some readers may experience a paywall.)

Iron rusts in the presence of water and oxygen because these ingredients enable the metal atoms to release energy and enter a more stable state.

Accidental ingestion of batteries can be life-threatening

Tissue in the body can serve as a circuit path between the anode and cathode of a battery, resulting in electrical burns and gradual tissue erosion. Stomach acid can corrode a battery and cause its toxic contents to leak, making a person sick. Batteries for internal use, such as in pacemakers, require special designs.

The 2019 Nobel Prize in Chemistry was awarded for lithium-ion battery development

Stanley Whittingham developed the first functional lithium battery in the early 1970s, while John Goodenough doubled its electrical potential in 1980 by replacing the cathode, thereby enhancing its commercial viability. Five years later, Akira Yoshino developed an anode using carbon material, reducing the risk of flammability.

Genetically modified viruses can help construct battery electrodes

MIT scientists' modifications caused the viruses to attract conductive materials, such as gold ions, which the viruses self-assembled into nanowires that could be used in batteries. These components allow batteries to be thinner and flexible enough to be constructed into new shapes.

Solid-state batteries substitute the fluid electrolyte layer with a solid

The non-flammable solid greatly reduces the risk of fire and explosion, as well as the release of toxic gases via leaks in the existing sulfide-based systems. These batteries use garnet-type solid electrolytes, which provide high ionic conductivity and chemical stability but require temperatures above 1,000 degrees Celsius (1,800 degrees Fahrenheit) for fabrication.

How chemical bonds between atoms form molecules and large geometric structures

In ionic bonding, one atom transfers at least one electron to another atom, forming two atoms of opposite charge. These atoms attract one another and can stack up in a 3D grid called a lattice. Covalent bonding, where electrons are instead shared, can produce enormous molecules, such as the two found in human chromosome 13, which each contain 37 billion atoms.

Lithium can store and deliver substantial energy for its cost and weight

When exploring which compounds would be best suited for batteries, scientists sought elements that were relatively inexpensive to mine, readily available, and that provided high energy density—how much chemical energy an element could store for its size. Lithium-ion batteries provide these benefits and discharge at very low rates when unused.

Batteries are likely to stop working sooner in cold temperatures

The electrolyte separating the cathode and anode of a battery can thicken, impeding ion flow. Lower temperatures also slow the rate of chemical reactions, further reducing battery capacity. Large draws of power, such as when using heaters, heated seats, etc., in a car during winter, exacerbate battery drain further.

Batteries range in size based on their purpose, cost, and manufacturability

Lead-acid batteries used in combustion vehicles are resilient to temperature extremes, low-cost, and provide high surge current, which is needed for initial ignition. Alkaline batteries, including AA, AAA, and B, have long shelf lives and supply the low, steady power required for electronics with minimal demand fluctuations.

Bath bombs can produce endothermic reactions that cool water

In bath bombs containing citric acid and sodium bicarbonate, water facilitates the reaction between the bicarbonate and acid, providing energy as the salt dissolves. The loss of energy in the water reduces the average speed of the water molecules, reducing the temperature of the bath.

Legacy electronics have prevented significant advancements in alkaline batteries

While lithium-ion batteries have increased in energy density multiple times since their commercialization in 1991 and can be sized to various capacities by connecting numerous electrochemical cells, disposable alkaline batteries have been forced to maintain their 1.5-volt standard and form factors for compatibility with existing devices.

Understanding how atomic structure contributes to each element's properties

The outermost layer of electrons in an atom dictates how it will bond to other atoms. These bonds determine whether elements exist as solids, liquids, or gases in the environment and other characteristics. For example, electrons are freely shared between atoms in metallic bonds, allowing them to immediately re-emit light that strikes them, thus making most metals shiny.

Battery and plug-in hybrid EVs can operate with zero tailpipe emissions

Battery electric vehicles only run on electricity, while plug-in hybrids incorporate a small internal combustion engine that recharges the battery or directly powers the wheels to improve driving range. Fuel cell electric vehicles convert hydrogen gas fuel into electricity.

An overview of oxygenic photosynthesis, which releases oxygen from breaking down water

Within the membranes of chloroplasts, electrons in pigments are energized by light and transferred across a series of molecules until they create the energetic NADPH molecule. This transfer also powers a hydrogen pump, which creates an ion imbalance that, when relieved, produces energetic ATP molecules. Outside the membranes, both NADPH and ATP are used to synthesize G3Ps, which are funneled into other metabolic pathways to produce sugars.

Growing EV adoption requires battery management infrastructure

Despite rechargeable batteries' limited life cycle, companies like Spiers New Technologies have developed methods to repair, refurbish, repurpose and recycle these components to minimize environmental waste, lower demand for new critical minerals, and increase electric vehicle lifetimes.

How to make your own DIY ionic thruster

In the search for more efficient, sustainable types of propulsive thrust, scientists have dabbled in developing engines using ionic thrust, a type of propulsion using the attractive force of oppositely charged ions. First introduced by a Russian...

The different energy levels of each element result in unique colors when burned

When heated, electrons absorb energy and move to excited states within an atom. They promptly drop back down and release light energy corresponding to the size of the drop, which is unique to each element.

Neurons send signals through electrical impulses and chemical messengers

By converting electrical signals into chemical messages at synapses, neurons allow information to travel throughout the nervous system. With repeated use, synapses grow stronger, enhancing the associations between neurons.

Spontaneous combustion involves an object igniting on its own

Even without matches, sparks, or external flames, exothermic chemical or biological reactions can increase the internal temperature of objects to the point where they reach a threshold temperature that can cause them to catch fire. Running batteries and fermenting bacteria within compressed materials can build this heat and cause combustion.

How to safely dispose of every kind of battery

As lithium-ion batteries have proliferated in phones, e-bikes, power tools, and dozens of other devices, improper disposal has become a leading cause of fires in recycling facilities and garbage trucks. Battery Safety Now partnered with the US Forest Service's Woodsy Owl campaign to provide guidance on how to recycle batteries by type, including locator tools for drop-off sites.

The benefits of 3D printing batteries, from safety to sustainability

Rather than using the liquid electrolyte commonly found in lithium-ion batteries, 3D-printed batteries would use a solid layer, which can be custom-built into different shapes, deliver higher energy density by building thinner layers, and be fabricated with fewer raw materials compared to injection molding.

View the five most expensive metals used to make batteries

Before 2021, when lithium carbonate became the most expensive metal for use in electric vehicle cathodes, cobalt was the most costly battery metal. Of the top five, copper is the only metal not used in cathodes, arguably the most important part of the battery, which determines performance, longevity, and range.

Watch a tour of a battery manufacturing gigafactory

Inside Contemporary Amperex Technology Limited's facility, China's largest EV battery manufacturer uses slurry mixing, "jelly rolling," electrolyte injection, and other techniques and equipment to transform raw metals such as lithium and magnesium into approximately 2.2 million electrochemical cells daily.

Breaking down the challenges of alkaline environments and how extremophiles survive them

These areas are far less acidic than the interiors of most organisms' cells, and this imbalance draws protons that are needed for various metabolic processes, including energy production, out of cells. To counter these effects, some alkaliphiles have developed stronger proton regulation across their cellular membranes and proteins that drive these processes with greater stability amid such acidity imbalances.

Explore the human and environmental resources needed to make an electric vehicle

The minerals needed to build batteries for electric vehicles are expensive and often take a human toll paid by the communities where they are mined. This interactive article details what minerals make up an electric vehicle battery, where they come from, and dangers posed by the mining process.

Distinguishing polar and nonpolar molecules and why charges get distributed unevenly in molecules

Because each element has a unique number of protons and configuration where electrons exist, they attract electrons that are shared with other elements in chemical bonds to varying degrees. When this attraction—electronegativity—varies between two bonded elements, electrons are more likely to be near the more electronegative element and away from the less electronegative element. This can create regions of opposite charge, or poles, and thus polar molecules.

An overview of radioactivity, which can spontaneously change one element into another

Unstable atomic nuclei can transmute into a new element—an atom with a different number of protons—by emitting an alpha particle (two protons and two neutrons) or a beta particle (an electron). The electron can emerge from the nucleus when a neutron, which has no charge, suddenly transforms into a proton and an electron, thereby maintaining zero charge before and after the transformation, but altering the original element.

Glow sticks feed energy released in chemical reactions to fluorescent dyes

When bent, the glass tube inside the stick breaks, releasing hydrogen peroxide into the surrounding solution. The ensuing reaction creates unstable molecules that decompose and release energy, which is then absorbed by molecular dyes that emit light when their excited electrons return to lower energy states.

Visualize what happens to atoms during nuclear fission and how the process produces energy

Nuclear fission occurs when an unstable, often massive, atomic nucleus splits into smaller ones—daughter atoms—and releases energy. Within a nuclear reactor, these daughter atoms can collide and combine with neighboring atoms, destabilizing them and triggering a chain reaction of atomic splitting.

Battery life can be extended by avoiding heat and performing partial charges

Charging regularly in smaller amounts while keeping a battery between 30% and 80% helps maintain lower voltage levels, preventing long-term damage. Some devices continue to draw power when at 100%, which can cause tiny charge cycles and generate heat that degrades a battery's capacity.

A breakdown of nuclear fusion and what is impeding this near-limitless clean-energy resource

While today's nuclear reactors rely on fission, which releases energy by splitting heavy atoms, nuclear fusion releases energy by combining atoms together to form more massive ones. Fusion involves overcoming repulsive forces between the centers, or nuclei, of atoms, and, as of 2026, overcoming this repulsion takes more energy than is produced.

While gas-powered engines typically have 2,000 moving parts, electric vehicles have about 20.

From 1991 to 2024, lithium-ion battery cell prices have fallen by 99%

The decrease from about $10,000 to $50 per kilowatt-hour has been driven by innovations in battery chemistry, improvements in manufacturing and supply chains, and increases in global cumulative production, which have caused average price declines of 19% each time it has doubled.

Lithium-ion batteries are the standard for rechargeable devices

The costly setup of new mining operations and challenges with recycling amid growing demand have led researchers to search for alternatives, including sodium-ion, solid-state, and lithium-sulphur batteries, despite challenges with scalability.

How lithium has become one of the world's most important elements

Lithium is the driving force behind electric vehicles as the key element in the lithium-ion batteries that power the cars. But as demand for EVs rises, will global lithium supply keep pace with demand? This report projects demand will reach up to four million metric tons of the mineral compound containing lithium by 2030, with batteries accounting for 95% of end-use applications.

How does your body turn food into energy?

Cells get energy via a process known as cellular respiration, which involves turning glucose into ATP or adenosine triphosphate. Breaking the phosphate bonds of ATP results in usable energy being released into cells, which can then use that energy to power biological processes. This 10-minute video explains how glucose turns into ATP, giving the body the energy it needs to survive.

Clean energy technologies are more mineral-intensive than burning fossil fuels

Solar panels use silver due to its high conductivity, hydropower plants use chromium in their steel alloys, and geothermal plants need titanium to withstand abundant heat and pressure. Lithium—used in energy storage—is expected to see over 500% increased demand from 2020 to 2025.

Complex molecular reactions in our tissues cause muscle contraction

When we want to move a muscle, a signal travels from the brain and into the muscle cells in question, sparking a chemical reaction that causes the muscle's smallest contractile units—sarcomeres—to shorten, forcing the muscle to contract.

Mechanical watches measure the passage of time via the vibration of a quartz crystal

When electricity from a battery passes through the crystal inside a watch, the crystal vibrates, creating an electrical signal with a precise frequency of one vibration per second. This signal moves the hand of the watch so that it ticks once per second, allowing it to track the passage of time.

The first lithium-ion battery was invented at ExxonMobil

Initially a side project that became a priority due to the 1973 oil crisis, the battery's flammability risks and manufacturing challenges, along with the waning crisis, led the company to shut down its battery program. Other researchers would gradually improve upon published prototype designs in the next decade.

While atoms are normally made of protons, neutrons, and electrons, exotic ones have been built with antimatter—alternate versions of normal matter that live for fractions of a second and are about a billion times as rare.

Less common types of radioactive decay include emitting neutrons and antimatter

Through neutron emission, one or more neutrons are ejected from atoms that have far fewer protons. Neutrons can also be released by artificially inducing the fission, or separation, of a large atomic nucleus into smaller ones. During beta-plus decay, a positron—the antimatter version of an electron—is produced when a proton turns into a neutron.

Fireworks' chemical composition and internal layout produce their unique displays

The burning of different metal compounds, facilitated by combining fuel with oxidizers, results in explosions of varying colors. The timing and pattern are engineered through the arrangement of pellets and fuses.

The chlorophyll in plants captures energy in the form of red and blue light

Light-dependent reactions during photosynthesis convert sunlight into chemical energy, stored within the bonds of molecules such as ATP and NADPH. Rather than being absorbed for these reactions, most green light is reflected, causing most plants to appear green.