Explore an interactive breakdown of a wind turbine's components and how they work together to convert wind energy into electricity.

Learn more about the wind industry, from how a wind turbine works, to the new and exciting research in the field of wind energy.

Wind turbines have powered homes since 1887, and today they’re stronger, quieter, and more reliable than ever. Offshore wind could power millions and grow fast enough to meet climate goals.

A gearbox within the windmill converts the windmill's rotation into the vertical motion of a piston that pushes water up a pipe. It also drives the rotation of an Archimedes screw to move water to higher elevations.

Wind turbines are optimized to operate at wind speeds between about 10 and 80 kph, but an internal brake stops them if energy is not required. Routine preventative maintenance and cleaning also prevent blades from rotating.

Distributed wind turbines efficiently serve on-site energy needs, while land-based turbines are large and generate cost-competitive electricity. Offshore wind turbines capture powerful winds above the ocean and may be pounded into the seafloor using pile drivers or built to float above water at scales larger than the Statue of Liberty.

Odd-numbered blade values more evenly distribute wind loads across the face of rotors, reducing bending and twisting forces on the turbine that cause wear. Modeling shows that three blades optimize efficiency and cost for everyday wind speeds.

Wind turbines' energy generation capacity—or maximum power rating—also increased by 375% from 1998 to 2023. As of that year, wind turbines can produce more energy per dollar than solar panels, though transportation and installation challenges remain.

Between 85 and 95% of a turbine's materials—except for the blades—can be recycled. Blades have been left in landfills when not repurposed into playgrounds and sheds, but new processes may allow them to be made into pellets for injection plastics and concrete.

The tilt, curvature, and variations in Earth's surface composition across the globe cause different regions to receive different amounts of solar radiation. As the Earth spins and tries to achieve thermal equilibrium, air masses move and interact, creating wind.

Although wind was harnessed to generate electricity for individual buildings in the late 1800s, high costs, mechanical issues with turbines, and better fossil-fuel alternatives delayed wind power's widespread growth. After the oil crises of the 1970s, governments sought alternative energy sources and, in the decades that followed, provided tax credits to expand the wind power market.

Manufacturing larger, more powerful turbines will result in future wind farms requiring fewer of them to meet energy demands. Larger turbines will meet these demands while rotating at lower speeds, reducing risks to avian wildlife.

As of May 2025, the US Wind Turbine Database maps and provides technical specifications for 76,051 onshore and offshore turbines from 1,794 projects, ranging from small installations to large-scale wind farms.

This article provides animated diagrams depicting how different parts of fireworks function. The elements work together through timed mechanisms to produce desired effects.

These charts show how the shares of generated electricity sources—solar, wind, hydro, nuclear, bioenergy, oil, gas, and coal—have changed since 1985. Since 2010, an increase in renewable sources has offset the share lost by nuclear and fossil fuels.

Although drones are used to conduct initial reviews from the ground, mechanical engineers trained in turbine maintenance face extreme risks during close inspections more than 150 meters off the ground.

The proliferation of misinformation and conspiracy theories surrounding wind farms is driven by deep-seated anxieties about change, distrust of government, and resistance to confronting the complexities of modern energy solutions.

The power grid is evolving to include ever-higher levels of solar and wind, which don't provide inertia. Should system planners and operators panic?

The system includes generators for producing electricity and millions of miles of transmission and distribution lines to transport the energy. The substantial increase in the number of electronic devices and electrical demand since the construction of much of the grid in the mid-1900s has strained infrastructure, requiring continuous upgrades and massive investments in new construction.

In this simulation, users can adjust the tornado's diameter and rotation speed to see its impact as it passes through a series of trees and a one-story home.

Wind turbine towers are typically hollow, housing only cables and a ladder for maintenance access. The excess electricity a wind turbine collects could power a stack of server racks more than 100 meters (328 feet) high within its tower.

In this application, users can modify the demand of fictional cities and the supply of various generators, including a nuclear power plant and a wind farm, which can be disconnected from the grid. Notice that current may flow into or out of external systems to compensate for available generation. See what it takes to cause a blackout in different cities or shut down the entire grid.

A seven-minute video illustrating how a storm is made. These factors—moisture, instability, lift, and shear—are explained through a series of data sets and creative, descriptive diagrams.

Once a horizontal vortex is created by air circulating between winds of different directions and speeds, an updraft, such as those seen in powerful thunderstorms, tilts the vortex vertically. The updraft then strengthens the vortex, which becomes a tornado upon touching the ground.

The US Department of Energy’s Renewable Energy Discovery (REDi) Island invite explorers to discover clean, renewable energy options by navigating a virtual island filled with energy efficient power generation and desalinization technologies.

Winds at high altitude are stronger and more consistent than those near Earth's surface, where natural and artificial barriers disrupt airflow. Kites pulled by the wind can extend a tether like a yo-yo, creating electricity in an attached ground generator.

This National Renewable Energy Laboratory visualization provides maximum confirmed efficiencies for nearly 30 research PV cell technologies from August 1975 to today. Concentrator multi-junction cells have led the field since 1993. (Desktop recommended site.)

Environmental impact studies, wind energy maps, anemometer data, and local, state, and federal regulations factor into wind farm projects, including offshore farms. Wind projects on public lands require additional permitting.

Despite initial carbon emissions during manufacturing, wind turbines generate nearly zero pollution across their 20- to 25-year lifetimes. Offsets occur when turbines replace energy generation from coal and natural gas plants, which emit carbon dioxide.

According to the theory, a large magnetic field generator, or dynamo, is created when liquid metal flows through the planet's outer core, producing electric currents that generate a magnetic field. Magnetization patterns in rocks on the surface of planets can serve as evidence for the presence of this internal structure at some point in the celestial object's past.

The simpler design significantly reduces the energy lost to heat compared to the approximately 2,000 parts in a gas-powered car. Pollution is also lower, though an EV's emission profile is only as clean as the electric utility it's plugged into.

Discover the many benefits to using renewable energy resources, but what is it exactly? From solar to wind, it’s the fastest-growing source of energy in the world – and how we can use it to combat climate change.

Vortex generators—small fins placed along airplane wings—create small eddies that prevent airflow separation, maintaining lift and preventing stalls. Golf balls have dimples that create a turbulent boundary layer on their surface, minimizing drag forces.

From minor system failures to more widespread blackouts, crews begin by assessing damage done to infrastructure, such as transmission towers and distribution power lines. Prioritizing essential services, such as hospitals, crews then begin restoration, starting with any damage found closest to the power generation and working down the distribution system to customers.

Only the second to be built in the US, the wind tunnel allowed the brothers to study how air moves around more than 200 different wing shapes. This data helped them refine a key math equation, long held as the standard, that had been based only on one wing shape.

Gasoline engines mix fuel and air, compressing it and igniting it to create thousands of tiny explosions that push pistons up and down. This movement spins the crankshaft, which moves a vehicle's wheels.

These typically fenced-off facilities with steel boxes or cylinders topped with cone-like caps house circuit breakers, fuses, and switches that can isolate sections of the grid to prevent electrical failures from spreading. Substations use transformers to modify electrical voltage and are customized to the generation, transmission, and distribution networks they interconnect.

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.