Window collisions and cats kill more birds than wind turbine farms

Researchers are developing solutions to reduce bird fatalities due to wind turbine farms, including radar systems integrating AI to detect birds and shut down systems. Painting blades with various patterns is also being tested, which may reduce bird strikes by 70%.

From 1990 to 2020, wind turbine height and blade length have more than tripled

Wind turbines' energy generation capacity—or maximum power rating—also increased by 375% from 1998 to 2023. As of that year, wind turbines can produce more energy per dollar than solar panels, though transportation and installation challenges remain.

Wind turbines explained

Wind turbines have powered homes since 1887, and today they’re stronger, quieter, and more reliable than ever. Offshore wind could power millions and grow fast enough to meet climate goals.

For the same cost, turbines with three blades are the most resilient

Odd-numbered blade values more evenly distribute wind loads across the face of rotors, reducing bending and twisting forces on the turbine that cause wear. Modeling shows that three blades optimize efficiency and cost for everyday wind speeds.

Wind turbines are limited to capturing no more than 59.3% of incoming wind energy

In 1919, German physicist Albert Betz applied the laws of conservation of mass and momentum to airstreams to calculate the theoretical limit. However, real-world turbines only convert 35 to 45% of available wind energy into electricity.

Offshore wind turbines are built like giant modular puzzles at sea

Due to their enormous size, turbines are assembled in parts on-site using prefab components, advanced cranes, and vibration-dampening systems to manage the dynamic ocean environment. Three-blade turbines became the norm because even-numbered blades create damaging vibrations.

The carbon footprint of manufacturing a wind turbine is offset within seven months

Despite initial carbon emissions during manufacturing, wind turbines generate nearly zero pollution across their 20- to 25-year lifetimes. Offsets occur when turbines replace energy generation from coal and natural gas plants, which emit carbon dioxide.

Agricultural land remains mostly unchanged after wind projects

From 2012 to 2020, less than 0.05% of available US farmland had commercial wind turbines installed. More than 95% of this land lacks wind farm structures such as turbine pads or roads, leaving most cropland and pasture-rangeland unchanged.

Maintenance, curtailment, congestion, and wind speed can park a wind turbine

Wind turbines are optimized to operate at wind speeds between about 10 and 80 kph, but an internal brake stops them if energy is not required. Routine preventative maintenance and cleaning also prevent blades from rotating.

Wind energy is categorized into land-based, distributed, and offshore types

Distributed wind turbines efficiently serve on-site energy needs, while land-based turbines are large and generate cost-competitive electricity. Offshore wind turbines capture powerful winds above the ocean and may be pounded into the seafloor using pile drivers or built to float above water at scales larger than the Statue of Liberty.

Wind farms are targets for conspiracy theories due to their visibility and complexity

The proliferation of misinformation and conspiracy theories surrounding wind farms is driven by deep-seated anxieties about change, distrust of government, and resistance to confronting the complexities of modern energy solutions.

Selection of wind farm sites considers wildlife impacts and wind resource potential

Environmental impact studies, wind energy maps, anemometer data, and local, state, and federal regulations factor into wind farm projects, including offshore farms. Wind projects on public lands require additional permitting.

Explore an interactive graphic of a wind turbine's components

Wind turbines contain a gearbox that increases the rotation of the blades by a factor of 100 from low to high-speed shafts. The latter moves magnets that change the magnetic field within a generator, creating electricity.

Wind energy 101

Learn more about the wind industry, from how a wind turbine works, to the new and exciting research in the field of wind energy.

Today's cars use turbocharged hybrid engines and AI-assisted technologies

In addition to enhanced speed, serious accidents and technological advances have led to major innovations, leading to more aerodynamic and more protective cars.

Fiberglass and epoxy resin on blades complicate the recycling of wind turbines

Between 85 and 95% of a turbine's materials—except for the blades—can be recycled. Blades have been left in landfills when not repurposed into playgrounds and sheds, but new processes may allow them to be made into pellets for injection plastics and concrete.

Carbon-neutral data centers may be possible if built within wind turbines

Wind turbine towers are typically hollow, housing only cables and a ladder for maintenance access. The excess electricity a wind turbine collects could power a stack of server racks more than 100 meters (328 feet) high within its tower.

Establishing the wind power grid required incentives, reliability, and affordability

Although wind was harnessed to generate electricity for individual buildings in the late 1800s, high costs, mechanical issues with turbines, and better fossil-fuel alternatives delayed wind power's widespread growth. After the oil crises of the 1970s, governments sought alternative energy sources and, in the decades that followed, provided tax credits to expand the wind power market.

Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

Understanding the power grid and how renewable sources fit in

The power grid is evolving to include ever-higher levels of solar and wind, which don't provide inertia. Should system planners and operators panic?

High-altitude kites can perform airborne collection of energy from high-speed winds

Winds at high altitude are stronger and more consistent than those near Earth's surface, where natural and artificial barriers disrupt airflow. Kites pulled by the wind can extend a tether like a yo-yo, creating electricity in an attached ground generator.

See technicians use rappelling gear to make wind turbine repairs from 35+ stories up

Although drones are used to conduct initial reviews from the ground, mechanical engineers trained in turbine maintenance face extreme risks during close inspections more than 150 meters off the ground.

As of 2025, wave power projects remain in early research and testing phases

Waves can become a steady source of renewable energy because they do not pause like wind and solar power do. However, funding gaps and the effects of storms, salt exposure, and biofouling—mussels and other sea creatures attaching to wave machines—have presented challenges in scaling the technology beyond testing sites.

Noise pollution from humans and technology alters animal behavior

Animals may experience chronic stress and health issues due to noise pollution, which often interferes with their mating sounds. Due to traffic, nightingales sing louder on weekday mornings, and birds near airports start singing earlier to avoid upticks in takeoffs and landings.

Electrical grids worldwide must double their power delivery capacity by 2050 to meet surging demand from AI and electric vehicles.

View a distribution of wind turbine locations across the US

As of May 2025, the US Wind Turbine Database maps and provides technical specifications for 76,051 onshore and offshore turbines from 1,794 projects, ranging from small installations to large-scale wind farms.

AI's growing energy demands are driving tech companies to consider nuclear power

Big Tech has rebranded nuclear power as a green solution to address the strain on the grid from millions of people using power-hungry AI tools. As of mid-2025, generating one image uses as much electricity as charging the average smartphone, or leaving a household light bulb on for 87 consecutive days.

Windmills can be designed to pump groundwater for irrigation or land drainage

A gearbox within the windmill converts the windmill's rotation into the vertical motion of a piston that pushes water up a pipe. It also drives the rotation of an Archimedes screw to move water to higher elevations.

Why decarbonizing the entire electric grid is impossible with its current infrastructure

Fossil fuel plants can be built anywhere and have thus typically been built near highly populated areas, such as coastal cities, where electricity demand is high. However, certain renewable resources operate most efficiently in specific regions, such as wind turbines in the Midwest, and therefore require substantial transmission infrastructure to be constructed to transport the generated electricity.

Airplanes generate enough lift to fly by accelerating air faster over their moving wings, which makes the pressure above the wings lower than the pressure below.

How birds are becoming research assistants

Through the creation of tiny sensors easily placed on their bodies, birds have served as research assistants for various scientists. With untold numbers of birds sending back data, researchers have achieved greater insights in long obscure areas of meteorology, ecology, and more. For example, weather scientists use high-flying birds to outline the height of the planetary boundary layer, while conservationists track gulls to protect migrating whales. Learn more here.

Data center power demands have delayed the retirement of coal plants

US data center power consumption is expected to triple by 2035 to meet the growing infrastructure needs of AI platforms. Longer construction times and higher startup costs for renewable energy systems such as wind and solar have led to at least 15 coal power plant closures being postponed.

More batteries in the power grid would create an on-demand energy reservoir

Most power grids are inefficient because they require enough generation capacity at all times to avoid blackouts. This means at any given time, as much as 50% of generating capacity at power plants can go unused. Batteries would reduce this inefficiency and allow for real-time adjustments.

Engineering tall structures requires managing wind, earthquakes, and other destabilizing factors

Reinforced concrete, energy dampers, braced frames, flexible structures, and aerodynamic decks were among the methods implemented when building structures such as the Shanghai Tower, the Texas Super Skyscraper, and the South Rangitīkei Viaduct.

When users prompt AI chatbots, both cooling systems that support data centers and power plants that rely on steam cycles to generate electricity for data centers contribute to water use.

Turbulence is needed to make airplanes more stable and golf balls fly farther

Vortex generators—small fins placed along airplane wings—create small eddies that prevent airflow separation, maintaining lift and preventing stalls. Golf balls have dimples that create a turbulent boundary layer on their surface, minimizing drag forces.

Clean energy technologies are more mineral-intensive than burning fossil fuels

Solar panels use silver due to its high conductivity, hydropower plants use chromium in their steel alloys, and geothermal plants need titanium to withstand abundant heat and pressure. Lithium—used in energy storage—is expected to see over 500% increased demand from 2020 to 2025.

Wind helps trees develop resistance to collapse

Scientists at Biosphere 2 found that trees grew faster in the facility than those in the wild but collapsed more quickly when replanted outdoors. Researchers uncovered that trees build resistance when pushed and pulled due to wind stress, strengthening their foundational root systems.