Microfiber cloths have four times as much surface area as similarly sized cotton, enabling them to more effectively trap dirt and oil.

Washing clothes is a significant source of global microfiber pollution

Synthetic fabrics shed millions of plastic microfibers during washing, which pass through wastewater treatment and end up in oceans, soil, and food chains. A single wash load can release several million microfibers, but washing with cold water can reduce this.

The prevalence of microplastics came from plastic’s affordability and versatility

Microplastics' durability and overuse have led to massive pollution that overwhelms the planet's ecosystems. Avian, terrestrial, and marine life have been observed to contain microplastics in their bodies, but reverting to paper, cotton, and other materials in manufacturing also brings environmental challenges.

Microplastics are entering human food chains through fertilized farmland

Microplastics from sewage sludge used as fertilizer contaminate agricultural soil and eventually enter our bodies through the food supply of carrots, wheat, and other foodstuffs. In Europe, farmland may absorb up to 710 trillion microplastic particles yearly.

Synthetic textiles and tires are the top sources of secondary ocean microplastics

These sources contribute more than 60% of the primary microplastics polluting the oceans, followed by city dust and road markings. City dust is made of pieces of building coatings, synthetic footwear, and other human-made objects that have broken off due to weathering and abrasion.

Research has shown that bioengineered algae can help remove microplastics

Scientists at the University of Missouri found that, like microplastics, some algae are particularly hydrophobic—they repel water—and that both can clump together to form a microplastic-algae sludge, which can then be collected to remove microplastics from water. Researchers believe this algae provides a scalable solution for microplastic removal that can be employed in wastewater treatment processes.

The challenges of trying to study microplastics in microplastic-abundant labs

The presence of microplastics in instruments, surfaces, and air has made accurate measurement of their levels in lab samples difficult, given the high likelihood of contamination. While the use of stainless steel tools in a sealed, clean lab may reduce accidental exposure, existing methods can misidentify biological substances, such as fat, as plastics, further complicating research.

Arteries with microplastic deposits linked to higher risk of cardiovascular events

Research shows that microplastics and nanoplastics can accumulate in major arteries, and patients with these deposits are significantly more likely to suffer heart attacks, strokes, or death. These deposits are possible due to these particles' ability to cross blood barriers.

Airborne microplastics may influence cloud formation and climate

Microplastics are increasingly found in the atmosphere and may affect the climate by reflecting or absorbing sunlight based on their pigmentation. Like mineral dust, they may become cloud seeders and alter regional precipitation patterns as they become more abundant.

Learn about unconventional ways to clean up crude oil, including using moss and chickens

Studies show that microorganisms in chicken manure can break down the hydrocarbons in crude oil without producing toxic by-products. Scientists have also explored avoiding the environmental risks of chemical dispersants and synthetic adsorbents by using human hair and peat moss to adsorb crude oil, which can be taken up by their cuticles and porous structures, respectively.

The marvels of mucus

Mucus—otherwise known as snot or phlegm—has a gross reputation, but the substance is actually of vital importance, lining the moist surfaces of our nose, intestines, lungs, and more. It plays a constant role in keeping our tissues from drying out and acts as a line of defense, but if it gets too sticky or thick, it can cause problems. Read about the marvels of mucus here.

Mermaid tears are a lasting and hazardous form of ocean plastic pollution

Also known as nurdles, these tiny plastic pellets are extremely difficult to remove once spilled. Their chemical composition, which enhances absorption, causes them to contain higher concentrations of certain toxins than the surrounding environment.

Founder of The Ocean Cleanup explains the case for cleaning oceans

Removing trash from the oceans not only saves wildlife, it may save human lives, too. The CEO and founder of The Ocean Cleanup explains how existing plastic pollution harms us and get harder to clean up over time.

Most advanced touch screens rely on electrical charge in your skin

Capacitive touch screens store electrical charges in an electrostatic grid of tiny wires. When we touch the screen a tiny electrical charge is transferred from the screen to the finger to complete a circuit (since skin has positive and negative charges). This connection creates a voltage drop on that point of the screen. Cloth, however, doesn't conduct electricity, which is why humans can't wear thick gloves and operate their smartphones.

What makes food crispy, and how science can be used to maximize this property

The fracturing texture experienced when biting into vegetable tempura, fried chicken, pastry crusts, and other foods comes from having a dehydrated, porous surface. When frying food in hot oil, trapped water vaporizes and escapes, creating tunnels and pores in the food as it dehydrates. Breading, particularly with the large, irregular shapes of panko, and leaveners can help create more air spaces.

Space trash could be cleaned up using a giant inflatable bag

California-based TransAstra has developed and tested a device called Capture Bag, intended to catch anything from small rocks to house-sized boulders. The company claims its system could also be adapted for asteroid capture and mining.

Why professional tennis players are so picky about balls before serving

Just as swimmers shave their bodies before competitions to swim faster, experiments show that tighter, less fluffy balls experience less drag forces when moving through the air and thus produce faster serves at the cost of less control. Players may select a fuzzier ball in scenarios that call for safer, more cautious play.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

Simulations suggest ice's slipperiness comes from rearranging molecules

Past models have proposed that slipperiness arises from a thin layer of liquid water formed at the ice's surface by frictional melting. However, new research suggests that electromagnetic forces between interacting surfaces push water molecules out of an ordered, crystalline structure and into a shapeless, soft, slippery layer. This process occurs solely through contact, independent of pressure or friction.

A macrophage can eat 100 bacteria, on average, before it's exhausted

These specialized immune cells are first responders during inflammation, responding to a threat or injury and then performing other inflammatory response tasks, including summoning neutrophils to help attack invaders.

Exploring carbon compound pore structures contributed to improved gas mask filtration

During World War II, the British Coal Utilisation Research Association sought to improve the efficiency of coal as an energy source and studied the effectiveness of charcoal filters to keep soldiers safe. Rosalind Franklin's research there formed the basis of her PhD and led to five scientific papers.

Conditioners can help unshrink garments by lubricating fibers

Textile fibers relax and shrink due to heat and moisture, disrupting hydrogen bonds. While loosely knitted fabrics are more prone to shrinkage than tightly woven ones, synthetic fibres like polyester resist shrinkage due to their crystalline structure.

The applications and industrial uses of graphene, the single-atom-thick material

Shortly after its discovery in 2004, the strength, flexibility, optical properties, and conductivity of this thin layer of carbon atoms earned it the designation of a "wonder material," but breakthroughs in its use have taken decades of research. As of 2026, graphene-enhanced electronic sensors, optical microchips, concrete, and supercapacitors are available, though scale production challenges remain.

Methane leaks during natural gas processing reduce the gas's overall cleanliness

Natural gas is advertised as a cleaner fossil fuel because it emits 50% less carbon dioxide than oil and coal when burned. Supporting analysis only considers end-use combustion and excludes total emissions generated by extraction, shipping, and processing.

Why some US cities pay thousands of dollars for a single public trash can

The rationale supposes high-end, heavy-duty trash cans reduce litter and maintenance costs, justifying per-unit costs of close to $3,000 in some municipalities. But results are mixed, and some experiments using cheap 55-gallon drums were similarly effective.

Microforests in urban environments may help combat climate change

Areas of densely packed native trees and drought-tolerant plants within cities can pull carbon dioxide from the air, cool surrounding neighborhoods, and support local wildlife. The idea behind microforests traces back over 50 years to Japanese ecologist Dr. Akira Miyawaki, who promoted planting whole ecosystems to restore degraded land.

The use of fungi to detoxify land and water—a process known as mycoremediation—has been used to clean up natural resources affected by the 2025 California wildfires.

How artificial photosynthesis can help make plastics and fuels using sunlight

These systems link a molecular light absorber to a catalyst that can synthesize fuels—such as ethanol—and ethylene, a precursor to plastics, in a carbon-neutral manner. Because these byproducts have greater energy concentrations than the carbohydrates produced by photosynthetic organisms, research is ongoing to engineer the necessary catalysts.

Monks and peasants once used cobwebs as canvases for painting

The tradition goes back to the 16th century, when the delicate canvases were hung in churches and cloisters. The difficulty in painting on the cobwebs was intended to illustrate one's devotion to their faith.

How a polluted New York City waterway created extremophiles hungry for 'black mayonnaise'

In the 19th century, coal processing plants, oil refineries, a tannery, and other industries lining the Gowanus Canal contaminated its waters with coal tar, sewage, and other pollutants, forming the toxic sludge. Samples taken from the site before clean-up efforts revealed over 450 species of microbes with metabolisms adapted to break down these contaminants.

Every MLB baseball needs to be rubbed with mud

When baseballs are done being hand-sewn and shipped to an MLB ballpark, they don't go straight to the field. Every ball that is put in play–an average of 100 per game–has to be rubbed with mud to give the ball a better grip. This video introduces the only family licensed to sell mud to MLB and shows what's special about this particular mud.

Reflections from Ben Giles, history's greatest stain remover

Starting out as a freelance window cleaner, the British cleaning legend started taking on jobs cleaning out people's garages and shacks. He soon realized people would pay top-dollar to have their worst messes cleaned up by someone else.

In 1971, a $35 ferret helped clean the Fermi National Accelerator Laboratory

Lacking cleaning robots, Fermilab scientists purchased a ferret named Felicia when metal slivers obstructing accelerated particles were identified. They trained her to run strings through vacuum tubes more than 90 meters long, and cleanser-dipped swabs were then tied to the strings and pulled through to remove the debris.

HFMD can survive on surfaces for days at a time

That's why the virus can be transmitted via fomites—surfaces that have virus on them like doorknobs, kids toys, etc. These viruses are resilient—they are often even resistant to freezing (and are frequently stored at freezing temperatures in lab settings).

Microbes are essential to creating the many varieties of cheese, influencing texture and taste

Microbes break down proteins and fats and produce compounds with distinct tastes. These microbes can include bacteria (like the one used to give Swiss its trademark holes), molds (like the ones that give blue cheese its distinctive veining), and countless other tiny organisms.

Watch what it’s like to spend a day on the International Space Station

Microgravity makes personal care more complex on the International Space Station, where stray, floating materials must be captured to prevent them from entering vents and clogging filtration vents. No-rinse shampoo, water pouches, and other strategies help minimize obstructions.

Microwave ovens heat food by agitating certain molecules with non-ionizing light

Molecules with resonant frequencies within the microwave range vibrate, producing heat between adjacent matter, just as hands warm when rubbed together. The mesh in front of an oven's door confines the microwaves to the container, while the rotating plate allows different parts of food to travel through regions of maximum vibration.

Thousands of quarters and huge water bills: the economics of laundromats

There are approximately 30,000 laundromats in the US, serving the roughly 50% of apartment dwellers who do not have a washer or dryer. Shops profit when they can get their machines—roughly 30 to 40 per location, on average—to wash eight to 10 loads a day. Connections with commercial vendors help.

Drum shields help prevent mic bleed and dampen drum sound

Made of plexiglass or acrylic, the shields are commonly seen in churches and live venues to prevent drums from overpowering other instruments, improving the quality of the audio mix.

Face and neck massages improve the removal of brain cell waste products in mice

A study identified that massaging mice and monkeys' faces and necks enhanced the flow of cerebrospinal fluid. Because CSF has been shown to flush out proteins linked to Alzheimer's and Parkinson's, the research hints at non-invasive treatments to reduce the severity of these diseases.

The most common type of 3D printer fabricates objects using plastic

At the consumer level, the most common printing method is fused deposition modeling, which builds objects by melting an extruding thermoplastic filament that is deposited in layers. For industrial applications, selective laser sintering, which uses a laser to fuse particles of polymer powder (e.g., nylon), is preferred.

Clean energy technologies are more mineral-intensive than burning fossil fuels

Solar panels use silver due to its high conductivity, hydropower plants use chromium in their steel alloys, and geothermal plants need titanium to withstand abundant heat and pressure. Lithium—used in energy storage—is expected to see over 500% increased demand from 2020 to 2025.

Particle detection has evolved from cloud and bubble chambers to digital 3D displays

As invisible particles passed through cloud and bubble chambers, they disrupted supersaturated vapor and superheated liquid, respectively, creating trails that served as proxies for cosmic rays. The transition from photographed events to digital sensors enhanced data collection and accuracy.

Why water is the universal solvent, despite not being good at dissolving many substances

Because oxygen attracts electrons much more strongly than hydrogen does in H₂O, the molecule is polar, with a negative charge at the oxygen atom and positive charges at the hydrogen atoms. These charged regions can attract and pull apart charged portions of other polar molecules, such as washable inks, but are unable to dissolve nonpolar materials, such as glass and asphalt.

Turbulence is needed to make airplanes more stable and golf balls fly farther

Vortex generators—small fins placed along airplane wings—create small eddies that prevent airflow separation, maintaining lift and preventing stalls. Golf balls have dimples that create a turbulent boundary layer on their surface, minimizing drag forces.

Chip technology replaced magstripes to stop easy card cloning and fraud

The magstripe on bank cards always gives the same data, making it simple to copy using a device called a grabber. In contrast, embedded chips create a unique code with every transaction, making it much harder to clone or steal card information.

Particles found in Martian air pose significant risks to human lungs

Ultrafine dust, just 3 micrometers wide, is small enough to bypass lung defenses and enter the bloodstream, where its highly reactive chemicals can cause thyroid disease. Silica in the dust can also cause silicosis, a chronic and incurable lung disease.

How silica gel took over the world

Silica gel packets are those sugar packet-like bags that keep packaged foods and more dry and free of mildew. First invented in the early 20th century, they saw great commercial success starting in 1927, being deployed in traded goods across the world. This simple invention allows modern supply chains to extend across the globe by extending the preservation of shipped goods.

See examples of hyperaccumulators, the plants that can harvest heavy metals

These ideal species for phytoremediation possess biochemistry that allows them to absorb and store these elements without being poisoned by their accumulation. Pycnandra acuminata, one such plant, has blue-green sap due to an abundance of nickel, which it captures from the nickel-rich soil in which it grows.

Mosquito necroprinting uses an insect's mouthpart as the printer nozzle

Mosquitoes are abundant, and their nozzles are 32-100 times cheaper to harvest than to create from scratch out of metal or glass. By coating the organic nozzle to increase its strength, researchers are employing necroprinting to create tiny structures at better resolutions than commercial alternatives.

Shorter, more frequent touches are better than longer, rarer ones

That's according to a 2024 meta-analysis of 137 studies on touch. It found that as long as the touch is consensual, the identity of the toucher mattered little for adults, and there was even a benefit to receiving "touch" from objects like weighted blankets or robots. For newborns, however, the identity of the toucher did matter, and the greatest benefit came from parental touch.