Watch a server submerged in a fluid continue to run and stay cool by boiling the liquid away.

Data centers can be kept cool by circulating fluid over plates atop high-temperature components or by submerging equipment in non-corrosive oil that does not conduct electricity.

Data centers require interconnected server- and building-level cooling systems

Computer equipment can be cooled by circulating cold air or water through the equipment racks, siphoning the heated fluid into a heat exchanger. This exchanger transfers thermal energy to building cooling systems, which can dispose of the heat by evaporative cooling—the way humans cool off by sweating—or via air conditioning.

Our bodies cool us down by sweating because water requires a significant amount of energy to change state from liquid to gas, making it an ideal medium for carrying thermal energy away from our bodies.

Health workers may cool body temperatures with convection cooling

That's spraying a patient with water and putting fans over them. Cooling the body by removing clothing and placing cold water and ice packs—and not blocking evaporation—are essential cooling steps.

Dilution fridges create the colder-than-space environments needed for quantum computers by successively lowering temperatures across layers plated with gold, which reduces heat transfer via radiation and gives them a chandelier-like appearance.

Thermodynamics makes building data centers in space to cool equipment impractical

Rather than cooling via interactions with flowing cold air or water, data centers in space would dissipate energy primarily by radiation, in which an object at any temperature above absolute zero emits light. This method is much less efficient at cooling and would require hyperscale data centers to have radiator panels thousands of times larger than those on the International Space Station.

Water vapor is used to manage heat in high-end smartphones

While smartphones have traditionally been cooled using a highly conductive plate that dissipates heat from the chip, vapor chambers offer a higher heat-removal capacity. This technology has been utilized in laptops for decades to absorb heat by cycling a fluid between liquid and gaseous phases.

IBM Quantum’s dilution refrigerators keep quantum processors colder than space

In IBM’s quantum lab, quantum processors are kept at a temperature of 15 millikelvin using dilution refrigerators. These refrigerators use nested thermal layers, cryogens like liquid nitrogen and helium, and powerful compressors to maintain the ultra-cold temperatures required for qubit stability and performance.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

Heat pumps use an easily boilable chemical to regulate temperature

In air conditioners, warm air is pulled from a home to turn a refrigerant into a gas, which is then compressed, raising its temperature. The gas naturally releases this energy to the comparatively cooler environment when exposed, then expands and is reused in the system. Heaters run in reverse, with the refrigerant picking up energy from the comparatively warmer environment.

When users prompt AI chatbots, both cooling systems that support data centers and power plants that rely on steam cycles to generate electricity for data centers contribute to water use.

Explaining the Leidenfrost effect, where water can hover and move against gravity

Water droplets can glide across surfaces whose temperatures are well above water's boiling point. This heat instantly vaporizes the bottom of the droplet, creating a layer of steam that the rest of the droplet rides and bounces upon. This can be seen when sprinkling water on skillets to determine if the surface is hot enough to cook on.

Since 2022, two-thirds of data centers have been built in water-stressed areas

In residential evaporative cooling systems, 10% of consumed water is lost to evaporation compared to 80% in data centers. Although some companies have pledged to become water-positive—replenishing more freshwater than they consume—by 2030 through a transition to air cooling, only 10% of data center operators track water use across all their facilities.

Synthetic diamonds may be used to cool microchips

The strong carbon bonds in diamonds efficiently carry vibrations, allowing them to conduct heat several times faster than copper, a metal commonly used in heat sinks. AI and high-performance computing have pushed researchers to investigate alternative materials for cooling solutions.

Watch a time-lapse of the construction of a data center

After the external structure of a data center is built, cooling systems are installed, followed by interior offices and other rooms. Before installing racks of servers and other equipment, floors are raised beneath where they will be installed to create space for cold fluid to be pumped into the hardware and to facilitate cable management.

Once cooled to temperatures just above 2 Kelvin, helium atoms exhibit a quantum property that removes internal friction, allowing the fluid to climb up walls.

The properties of helium, which has the lowest boiling point of any element

The colorless, odorless, mainly unreactive element condenses from a gas into a liquid at -268.928 degrees Celsius (-452.07 degrees Fahrenheit)—near the lowest theoretically possible temperature—allowing it to serve as a liquid coolant in machines without the risk of causing damage as a solid.

If the temperature of water continuously decreases but it is not given room to expand, it will eventually contract and form exotic forms of ice that sink in liquid water.

In nuclear reactors, water acts as a coolant and moderator, slowing neutrons produced in nuclear reactions so they are more likely to interact with nuclear fuel and generate sustainable energy.

Since 2026, the Large Hadron Collider has provided heat to thousands of French homes and businesses through a system that harnesses hot water from the accelerator's cooling circuits.

Bath bombs can produce endothermic reactions that cool water

In bath bombs containing citric acid and sodium bicarbonate, water facilitates the reaction between the bicarbonate and acid, providing energy as the salt dissolves. The loss of energy in the water reduces the average speed of the water molecules, reducing the temperature of the bath.

High-frequency sound waves have been used to brew espresso with room-temperature water and about one-fourth the energy of a traditional espresso machine, which relies on hot water and pressure.

How freeze-drying leaves food with less than 4% of its original water content

In specialized equipment, foods are brought down to temperatures below freezing before a vacuum pump removes the air from the container, lowering the pressure around the food and the boiling temperature of water. Heaters beneath the food slowly raise its temperature above the now-reduced boiling point, causing the water to go from a frozen to a gaseous state.

Unlike solar panels, which convert sunlight directly into electricity, concentrated solar power systems focus sunlight to heat a material that boils water, which then drives a turbine-generator to produce electricity.

Lasers can be used to reduce the motion of atoms because particles of light—photons—can collide with particles of matter, as billiard balls do, to slow them down.

The boiling temperature of water decreases with increasing elevation because the molecules need less energy to overcome the lower atmospheric pressure associated with thinner air.

13 unconventional ways to stay cool during heat waves

While air conditioning is the default solution for many in a heat wave, it can get expensive while requiring the consumption of fossil fuel energy. So, how else can you stay cool during a heat wave? This list compiles some practical, at times quirky, suggestions, including an ice-pack-filled aubergine hat.

The Large Hadron Collider is the world's largest cryogenic system, which uses 10,000 metric tons of liquid nitrogen and 120 metric tons of helium to cool 36,000 metric tons of magnets to temperatures colder than outer space.

Fish in polar waters contain proteins in their blood that act as antifreeze, and some manufacturers have used lab-grown versions of these proteins to help keep ice cream smooth.

A look at hydrothermal vents, where barophiles and hyperthermophiles survive boiling water

Discovered in 1977 during an exploration of the Galapagos Rift, these seafloor openings spew hot magma and chemicals that heat seawater to hundreds of degrees. Without the sunlight found at depths of less than 1,000 meters (3,281 feet), extremophiles in these environments convert released chemicals into energy to survive, alongside surviving extreme pressures.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

Electricity can flow indefinitely along a ring of superconducting material, which provides zero resistance to the movement of charges due to quantum effects.

Under certain conditions, very hot liquids can freeze more quickly than cooler ones—a phenomenon called the Mbemba effect, after the Tanzanian high school student who accidentally observed it.

Webb's sunshield enables extreme cooling for precision space observation

To avoid interference from its own heat, the telescope uses a five-layer shield to stay ultra-cold and stable, allowing its instruments to function at cryogenic temperatures. One instrument, MIRI, gets so cold it needs a helium-powered cooler to reach just 7 Kelvin, or -447°F.

Temperatures colder than Pluto can allow electricity to flow resistance-free

Since its discovery in 1911, applications of superconductivity have made MRI machines and maglev trains possible due to quantum effects at extreme temperatures. These effects are modeled as electrons cooperating in pairs and flowing more efficiently.

View the layout and components that make up a typical data center

Alongside server rooms for the storage, processing, and transmission of data, data centers include climate control systems to manage the heat generated by microchips, backup systems to ensure systems can run during power outages, offices for on-site personnel, and monitoring and security stations to provide continuous protection against physical threats.

How chefs suspend liquid in edible pearls resembling caviar to introduce a new texture to fluids

Through spherification, drops of a solution of sodium alginate and a flavored liquid are placed in a calcium lactate solution, which forms a chemical skin around them. This is because calcium replaces the sodium in the alginate chains, forming a gel around each drop's liquid interior.

A guide to making ice cream with liquid nitrogen by flash-freezing dairy

Only existing in liquid form at extremely low temperatures, nitrogen can rapidly freeze cream, coconut milk, and other liquids into small crystals, producing smooth, creamy ice cream. As a safety precaution, liquid nitrogen should be handled in a well-ventilated area with safety goggles and protective gloves.

At 0.01 degrees Celsius (32.02 degrees Fahrenheit) and about 0.6% of Earth's surface pressure, water simultaneously exists as a solid, liquid, and a gas.

Desalination involves costly, energy-intensive methods for producing freshwater

Thermal desalination heats saltwater to produce steam, and reverse osmosis forces saltwater through a membrane that only allows water through. In both cases, freshwater is collected and remineralized for consumption, while wastewater brine is often returned to the ocean, where it may harm marine organisms.

When experiencing turbulence, fluid elements undergo stretching and folding

Simulations show patches of fluid particles, such as splashes of milk, bend under turbulent flow, creating curvature that grows linearly then exponentially. This accelerated deformation enhances folding and mixing faster than other methods, such as stirring or beating.

Reduced inflammation from cold plunges lacks scientific support

The cold water triggers immediate cold shock, increasing heart rate and blood pressure, and prolonged exposure can lead to cold-water incapacitation and hypothermia. Plungers are encouraged to enter the water slowly and manage their breathing to reduce the risk of shock. Warm baths post-plunge are discouraged, and exercise is generally better for recovery.

Geothermal power can generate electricity and provide direct heating for homes

By drilling several kilometers through penetrable rock, wells can access highly pressurized groundwater warmed by thermal energy trapped beneath Earth's surface. This water can be turned into steam to create electricity in generators. Heating systems several meters deep can pump fluid underground before circulating it through buildings.

Geothermal power can be used beyond heating and energy production

Depending on the depth of the natural vents or artificial wells drilled, the surrounding fluid temperature will vary greatly—from 10 to 371 degrees Celsius (50 to 700 degrees Fahrenheit)—allowing for various applications, including the drying of cement, concrete, and lumber, as well as the processing of pulp and paper.

Aquifer thermal energy storage systems bank water heated during the summer in aquifers—layers of porous rock, gravel, and sand filled with groundwater—which are then collected in winter to warm homes.

Freezer burn is the result of moisture leaving ice cream, something that's easily avoidable.

Watch a demonstration of the greenhouse effect with carbon dioxide, where thermal energy is trapped by the gas within a container, causing the temperature to increase.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

The benefits of sous vide: cooking food in bags immersed in water

Through this technique, food can be prepared to precise temperatures lower than those of open flames, without the risk of overcooking, with less oil, fat, and salt, and without requiring ongoing attention. By allowing for long cooking times, tougher cuts of meat can also be prepared at lower temperatures.