Some synthetic diamonds are purposely made with defects for new technologies

Grown in plasma-filled chambers or reactors where pressures reach 800,000 pounds per square inch, diamonds can develop properties like electrical conductivity and magnetic field sensitivity through exposure to elemental impurities or removal of some of their carbon atoms.

The new phenomenon of 15-minute lab-grown diamonds

In 2024, scientists developed a groundbreaking method to create diamonds at normal room temperature and pressure. This efficient and simple process contrasts with the traditional high-pressure, high-temperature method. While limitations still exist, such as minuscule sizes, this discovery moves us toward an exciting new era in diamond synthesis. Check out the article for further information about how diamonds are made.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

Diamonds have been made from substances such as peanut butter and carbon dioxide, though they can be created from any carbon-rich material under extreme pressure and temperature.

Several birthstones play key roles across modern technologies

Diamonds are used in drills and quantum computing, while peridot and zircon help in steelmaking and carbon capture. Rubies, sapphires, and alexandrite enable several varieties of lasers found in medicine and advanced optics. Garnets are found in water filtration systems and radiation detectors. Sapphires are used as substrates in semiconductors.

Data centers can be kept cool by circulating fluid over plates atop high-temperature components or by submerging equipment in non-corrosive oil that does not conduct electricity.

Dilution fridges create the colder-than-space environments needed for quantum computers by successively lowering temperatures across layers plated with gold, which reduces heat transfer via radiation and gives them a chandelier-like appearance.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

How diamonds form in the deep earth

Deep within Earth's mantle, diamonds form from carbon-bearing fluids. The formation of these beautiful gemstones, the only direct samples we have of the mantle, helps scientists uncover how carbon functions deep inside our planet. Understanding this complex process aids in the exploration for new diamond deposits.

Watch a server submerged in a fluid continue to run and stay cool by boiling the liquid away.

Water vapor is used to manage heat in high-end smartphones

While smartphones have traditionally been cooled using a highly conductive plate that dissipates heat from the chip, vapor chambers offer a higher heat-removal capacity. This technology has been utilized in laptops for decades to absorb heat by cycling a fluid between liquid and gaseous phases.

Research suggests AI data centers may be creating microclimate heat islands

An analysis of satellite data from 2004 to 2024 showed that land surface temperatures in the areas surrounding AI data centers typically increase by an average of 2 degrees Celsius (3.6 degrees Fahrenheit) after they begin running. Across the 6,000 global data centers analyzed by the study, temperatures increased by as much as 9.1 degrees Celsius (16.4 degrees Fahrenheit).

Graphite is a powerful conductor and heat-resistant material

Graphite can withstand temperatures of more than 3,000 degrees Celsius, allowing it to contain molten metal in steel production. Rosalind Franklin identified which carbon compounds become graphite and laid the groundwork for their use in industrial applications.

The applications and industrial uses of graphene, the single-atom-thick material

Shortly after its discovery in 2004, the strength, flexibility, optical properties, and conductivity of this thin layer of carbon atoms earned it the designation of a "wonder material," but breakthroughs in its use have taken decades of research. As of 2026, graphene-enhanced electronic sensors, optical microchips, concrete, and supercapacitors are available, though scale production challenges remain.

IBM Quantum’s dilution refrigerators keep quantum processors colder than space

In IBM’s quantum lab, quantum processors are kept at a temperature of 15 millikelvin using dilution refrigerators. These refrigerators use nested thermal layers, cryogens like liquid nitrogen and helium, and powerful compressors to maintain the ultra-cold temperatures required for qubit stability and performance.

A startup is trying to create the diamond equivalent of the gold standard

It's called the Diamond Standard Co, and it uses an algorithm to assign standard values to a variety off small diamonds, grouping them together into individual coins. Historically, diamonds haven't been able to be classified as commodities or standardized like gold because they aren't uniform—factors such as clarity, cut, color, and carat size significantly influence the value of a diamond.

Silicon must be 99.9999999% pure to be used in creating microchips

After the mined quartz is processed in an electric-arc furnace to remove oxygen from the silica, it undergoes the Siemens process, where it is bathed in hydrochloric acid. The liquid produced in the reaction undergoes multiple distillations to produce ultra-pure silicon in the end.

DNA computing allows for storage and processing of massive amounts of data

Although costly and less efficient for simpler tasks, as of 2025, DNA could hold 455 exabytes of data with near limitless parallel computation potential in small data centers. Every movie ever made would fit inside the volume of a single sugar cube.

Lasers help build the layers of circuit components in microchips

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

Genetically modified viruses can help construct battery electrodes

MIT scientists' modifications caused the viruses to attract conductive materials, such as gold ions, which the viruses self-assembled into nanowires that could be used in batteries. These components allow batteries to be thinner and flexible enough to be constructed into new shapes.

Semiconductor chips are electronic devices that store and process information

They can contain billions of microscopic switches on a chip smaller than a fingernail. An article provides a quick overview of how the devices work and how they’ve provided the backbone of the computer age.

Within fabrication plants, it takes about three months to manufacture hundreds of microchips from a single wafer of pure silicon using light and significant quantities of electricity, water, and hazardous chemicals.

Superconducting qubits have become foundational to today’s quantum computing efforts

Relying on electrons experiencing no friction across metal, these qubits require extremely low temperatures and behave like artificial atoms. The first superconducting qubit, invented in 1999, was large enough to be seen with the naked eye.

Lasers can be used to reduce the motion of atoms because particles of light—photons—can collide with particles of matter, as billiard balls do, to slow them down.

Clean energy technologies are more mineral-intensive than burning fossil fuels

Solar panels use silver due to its high conductivity, hydropower plants use chromium in their steel alloys, and geothermal plants need titanium to withstand abundant heat and pressure. Lithium—used in energy storage—is expected to see over 500% increased demand from 2020 to 2025.

AI's growing energy demands are driving tech companies to consider nuclear power

Big Tech has rebranded nuclear power as a green solution to address the strain on the grid from millions of people using power-hungry AI tools. As of mid-2025, generating one image uses as much electricity as charging the average smartphone, or leaving a household light bulb on for 87 consecutive days.

A diamond's color comes from impurities, defects, and unique formation processes

While most diamonds are transparent and sparkly, the presence of nitrogen and boron during formation can make them yellow, orange, or blue. Radiation can produce green diamonds, and structural deformities can introduce red hues.

The Majorana 1 chip may provide quantum computing using geometry-based qubits

Traditional quantum computers are incredibly fragile, with encoded information easily disrupted and requiring significant error correction systems. Microsoft’s approach involves storing data on a surface, which is more stable, but involves an elusive particle first theorized in 1938.

Flexible integrated circuits can be built from carbon nanotubes and elastic materials

Stanford researchers arranged the nanotubes in fishnet-like networks that allow deformation without loss of function. The stretchable ICs have been shown to power micro-LED displays and may be used in smart clothing.

Thermodynamics makes building data centers in space to cool equipment impractical

Rather than cooling via interactions with flowing cold air or water, data centers in space would dissipate energy primarily by radiation, in which an object at any temperature above absolute zero emits light. This method is much less efficient at cooling and would require hyperscale data centers to have radiator panels thousands of times larger than those on the International Space Station.

Visualization of printing synthetic DNA

Ever wonder how synthetic DNA is made? Discover how GenScript uses innovative technology to synthesize precise, high-quality DNA at a larger scale than ever before.

Data centers require interconnected server- and building-level cooling systems

Computer equipment can be cooled by circulating cold air or water through the equipment racks, siphoning the heated fluid into a heat exchanger. This exchanger transfers thermal energy to building cooling systems, which can dispose of the heat by evaporative cooling—the way humans cool off by sweating—or via air conditioning.

A 37.41 carat, bicolor diamond likely formed from two distinct geological processes

Discovered in a Botswana mine, half the stone is clear, having formed from carbon being squeezed under extreme heat and pressure into a tight crystal structure. The pink half formed earlier and resulted from minor bending of the crystal during tectonic activity without causing it to brown or break.

Photonic integrated circuits use light instead of electrons within circuit components

Instead of processing electric signals, photons in the visible and near-infrared serve as optical signals between chips made of electro-optical crystals. PICs can enable lower power consumption and heat generation by eliminating the friction from electrons moving along wires.

A simple explanation of semiconductors

Semiconductor chips are electronic devices that store and process information. Today they can contain billions of microscopic switches on a chip smaller than a fingernail. The article provides a quick overview of how the devices work and how they've provided the backbone of the computer age.

Quantum computers can simulate nature more effectively than classical computers

Ordinary computers struggle to simulate quantum fields due to entanglement, but systems built from those elements can model the complexity. Systems using particle in more than two states—qudits—have successfully modeled 2D electromagnetic fields and done so more efficiently.

Particle beams can be used to alter the surface properties of artificial joints

Surface hardening and embedding specific elements or coatings can improve the biocompatibility and bone tissue integration of these implants. Particle accelerators are significant sources of the radioisotopes needed in medical diagnostics, and microwave linear accelerators are used in the majority of cancer irradiation treatments.

13 unconventional ways to stay cool during heat waves

While air conditioning is the default solution for many in a heat wave, it can get expensive while requiring the consumption of fossil fuel energy. So, how else can you stay cool during a heat wave? This list compiles some practical, at times quirky, suggestions, including an ice-pack-filled aubergine hat.