A 1,000 square kilometer patch of solar panels in Africa can power most of Europe

The $500 billion Desertec initiative would have constructed massive solar farms in the Sahara and expansive electrical transmission networks across continents. However, the plan was built on concentrated solar power technology, which is more expensive and less practical than photovoltaics.

In the photovoltaic effect, light generates electricity by creating a charge imbalance after knocking electrons out of atoms in the semiconducting materials of solar cells.

Larger shares of solar power generation produce larger energy demand curves

Because solar energy is only available during daylight hours, transitioning an electric grid to solar requires significant ramp-ups and ramp-downs of other energy sources during mornings and evenings to compensate. Widespread adoption of affordable energy storage solutions can soften these curves.

Enough sunlight hits Earth in just 90 minutes to power the planet for an entire year

Despite this, in 2023, only 5.1% of electricity in the US came from solar energy. Solar panel technology has nonetheless made significant advancements since the 19th century, largely due to NASA's efforts in the space race.

Space-based solar power systems may beam energy to Earth

Researchers have successfully collected power from solar panels on a plane and transmitted it to a receiver on Earth's surface, achieving a milestone for space-based energy. The proof of concept is a precursor for a satellite-based solar farm that would transmit energy 24 hours a day.

Solar power is converting the sun's energy into thermal or electrical energy

Solar energy is the most abundant renewable energy resource. It can be captured in photovoltaic cells to generate electricity, solar heating and cooling technologies for temperature control, and concentrated solar power to drive steam turbines.

Explore global solar resources with this interactive map

One of the biggest challenges to deploying solar panels is whether electricity can be generated reliably when needed, day after day. This detailed interactive map calculates the solar power output potential of regions worldwide and provides a visual comparison between locations such as North Africa and the US Midwest.

Why decarbonizing the entire electric grid is impossible with its current infrastructure

Fossil fuel plants can be built anywhere and have thus typically been built near highly populated areas, such as coastal cities, where electricity demand is high. However, certain renewable resources operate most efficiently in specific regions, such as wind turbines in the Midwest, and therefore require substantial transmission infrastructure to be constructed to transport the generated electricity.

Solar sails use light as a means of propulsion

Photons possess momentum and can transfer it to objects they strike or bounce off, imparting radiative pressure, or a light-based force over a small surface area. Lasers fired at observational equipment with specially designed sails can theoretically use this mechanism to accelerate up to 20% the speed of light.

More batteries in the power grid would create an on-demand energy reservoir

Most power grids are inefficient because they require enough generation capacity at all times to avoid blackouts. This means at any given time, as much as 50% of generating capacity at power plants can go unused. Batteries would reduce this inefficiency and allow for real-time adjustments.

Understanding the power grid and how renewable sources fit in

The power grid is evolving to include ever-higher levels of solar and wind, which don't provide inertia. Should system planners and operators panic?

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

Electric grids that rely on solar power must compensate for reduced electricity generation during solar eclipses.

Unlike solar panels, which convert sunlight directly into electricity, concentrated solar power systems focus sunlight to heat a material that boils water, which then drives a turbine-generator to produce electricity.

Tesla's alternating current power's most of the world's electric grids

In 1879, Thomas Edison’s light bulb relied on direct current, but such currents can't efficiently transmit power over long distances. Nikola Tesla introduced alternating current, which feature far fewer energy loses. Despite Edison’s attempts to discredit AC, Tesla proved its efficiency by lighting the 1893 Chicago World’s Fair.

Bioluminescence may provide a sustainable alternative to electric lighting

French start-up Glowee is experimenting with lights made from bioluminescent microorganisms in public spaces to reduce energy use. While the technology shows promise, challenges remain with brightness, maintenance, and scaling it for widespread use.

Electrical grids worldwide must double their power delivery capacity by 2050 to meet surging demand from AI and electric vehicles.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

How artificial photosynthesis can help make plastics and fuels using sunlight

These systems link a molecular light absorber to a catalyst that can synthesize fuels—such as ethanol—and ethylene, a precursor to plastics, in a carbon-neutral manner. Because these byproducts have greater energy concentrations than the carbohydrates produced by photosynthetic organisms, research is ongoing to engineer the necessary catalysts.

Artificial photosynthesis turns CO₂ into sustainable fuel

Carbon conversion focuses on a central perplexing question: if carbon dioxide is a leading driver of climate change, and fossil fuels are made of carbon-based molecules, can we devise a way to convert CO₂ into useful alternatives efficiently? This video breaks down a potential pathway using artificial photosynthesis, which uses sunlight to convert CO₂ into fuel.

Why is hydropower important when other power sources go dark?

Hydropower can ramp up, recoup shortfalls, and stabilize the grid nearly instantaneously. A new study quantifies the energy source’s contribution to grid stability.

This online magazine runs on a solar panel, sometimes going offline

The publication's solar-powered server in Barcelona means the site goes dark when clouds roll in. It's designed as an intentional statement about energy and digital infrastructure. The magazine features essays advocating for the adoption of pre-industrial or low-energy solutions to modern problems.

All clean energy technologies rely heavily on critical minerals

Although many of these minerals have been used for decades, such as copper in electrical wiring, the accelerating demand for them has strained existing extraction and processing systems. Supply chain disruptions for these materials may delay and increase the cost of transitioning to solar, wind, hydroelectric, and geothermal power.

Solar panels can create pollinator-friendly habitats by protecting flowering plants

An example of agrivoltaics, where land is used for solar energy production and agriculture, the panels provide clean energy while also shading plants from excessive sunlight. Pollinator-friendly plants can improve water quality and reduce soil erosion by obstructing the wind.

View an interactive chart of energy conversion efficiencies for various photovoltaics

This National Renewable Energy Laboratory visualization provides maximum confirmed efficiencies for nearly 30 research PV cell technologies from August 1975 to today. Concentrator multi-junction cells have led the field since 1993. (Desktop recommended site.)

Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

As of 2025, wave power projects remain in early research and testing phases

Waves can become a steady source of renewable energy because they do not pause like wind and solar power do. However, funding gaps and the effects of storms, salt exposure, and biofouling—mussels and other sea creatures attaching to wave machines—have presented challenges in scaling the technology beyond testing sites.

As of 2022, just 0.5% of installed renewable energy capacity worldwide is geothermal

Despite being able to generate electricity regardless of the weather, solar (28%) and wind (27%) are far more prevalent, primarily because of their lower upfront costs. Geothermal plants use 88% less space than solar farms to produce the same energy, but have been restricted to geologically active regions.

Photoautotrophs, which include plants, algae, bacteria, and Euglena, are organisms at the base of the food web that convert light energy from the sun into chemical energy stored in sugars.

The first practical silicon solar cell was developed at Bell Labs

In 1953, scientists at Bell Labs attempted to develop a power source for phone systems in remote locations, as the dry battery cells lacked the necessary longevity. They experimented with solar power, but the selenium solar cells of the time were too inefficient, eventually leading to the usage of silicon.

How microgrids can modernize electric grids to meet 21st-century demands

Just as having a single, outdated internet service provider leaves an area helpless in the case of an outage, failures in the electric grid can be devastating to communities. For this reason, hospitals, data centers, and other structures have their own backup power supplies. However, decentralized microgrids would provide areas with their own electricity generation and storage, thereby reducing overall grid load and reliance while enabling better electricity management.

Learn how critical services, infrastructure, and people would be impacted by a US-scale blackout—a nationwide, long-term failure of the electric grid.

View a breakdown of global electricity generation in 2025, led by coal power plants.

Establishing the wind power grid required incentives, reliability, and affordability

Although wind was harnessed to generate electricity for individual buildings in the late 1800s, high costs, mechanical issues with turbines, and better fossil-fuel alternatives delayed wind power's widespread growth. After the oil crises of the 1970s, governments sought alternative energy sources and, in the decades that followed, provided tax credits to expand the wind power market.

View US maps of average daily solar resources and solar-based electricity generation

The state you live in can drastically change how much solar energy you can expect to capture to power your home. These National Laboratory of the Rockies maps show where you can reliably generate solar resources.

If the sun disappeared, we would not know about it for 8 minutes and 20 seconds, at which point the Earth would suddenly move in a straight line on its way out of the solar system.

The engineering underlying the electric grid and why it needs to be modernized

The system includes generators for producing electricity and millions of miles of transmission and distribution lines to transport the energy. The substantial increase in the number of electronic devices and electrical demand since the construction of much of the grid in the mid-1900s has strained infrastructure, requiring continuous upgrades and massive investments in new construction.

The unpredictability and brevity of lightning make lightning power impractical

While a typical lightning strike provides 30,000 amps at 300 million volts, the bolt only lasts about 30 microseconds. If the electrical surge could be captured—assuming one knew beforehand where it would strike—it would only provide enough electricity to power one home for about 6.4 hours.