The most common type of 3D printer fabricates objects using plastic

At the consumer level, the most common printing method is fused deposition modeling, which builds objects by melting an extruding thermoplastic filament that is deposited in layers. For industrial applications, selective laser sintering, which uses a laser to fuse particles of polymer powder (e.g., nylon), is preferred.

Multi-material 3D printing produces filament waste if only one nozzle is used

When swapping between colors or materials in a fused deposition modeling system, a considerable amount of filament is purged from the nozzle before introducing a new filament. Filament extruders can create new filament from purged elements, but the device combines colors and produces filaments of inconsistent diameter.

View a timeline of 3D printing technology through 2019

The first working 3D printing device was invented in 1983 and utilized stereolithography, a process in which a laser triggers a chemical reaction that hardens liquid resin. Powder-based laser sintering technology was patented in 1987, with metal-based powders first being used for 3D printing in 1997.

Chip-based 3D printers can be pocket-sized and involve no moving parts

Researchers have demonstrated a proof-of-concept version of a chip-based 3D printer that emits visible light onto light-sensitive resin to construct solid shapes. The technology may provide a portable, low-cost solution for future, small-scale fabrication needs.

3D printers can create nearly any object that can be digitally designed

Limited only by the size of the printer and the properties of the materials used for printing, fabrications, including household items, toys, props, cases, prototypes, and models, can take anywhere from fractions of an hour to several days to make, depending on design complexity, size, color changes, and printer settings.

Software subscriptions, licenses, and climate control systems add to 3D printing costs

Although the sharing of designs and reduced manual labor suggested the fabrication of prosthetics would be facilitated by 3D printing, particularly in developing regions, software and hardware requirements have posed hurdles to achieving this goal. While some insurance companies have refused to cover 3D-printed limbs, they are covered by Medicare.

Stereolithography uses light to fabricate objects in layers via chemical reactions

Specific locations in a tank of light-sensitive liquid resin are exposed to projected light, causing them to cure onto a build platform. The resulting cross-section of hardened plastic is moved slightly away from the light source, exposing it to resin once more, and the process repeats to produce successive layers.

Objects can be 3D printed with light by projecting 2D computerized tomography (CT) scans onto rotating cylinders of resin, which solidify upon exposure.

How 3D printing inside cells paves the way for microscopic machines

In 2026, scientists in Slovenia developed a method to 3D print a small elephant, several microscopic geometric objects, and barcodes for cell labeling within living human cells, which continued to grow and divide thereafter. The experiment opens the door to fabricating devices within cells to study and manipulate cellular functions.

Medical imaging allows 3D printers to create patient-matched devices

With imaging data on a person's anatomy, external prostheses and implants, such as cranial plates or hip joints, can be custom-printed to better match a patient's body. Fabrication of porous structures can promote bone growth, leading to longer-lasting implants.

Watch a time-lapse of 3D printing two pairs of eyeglasses by layering plastic filament.

As of 2025, the Factory of the Future 1.0 is the world's largest 3D printer

Housed at the University of Maine, the machine incorporates AI and can utilize bio-based materials to construct homes exceeding 3,000 square feet in size. Homes made from these materials are fully recyclable, as their components can be deconstructed, ground up, and reused as raw materials for printing.

Explore a library of data files for 3D printing

Data files are organized by category, including gadgets, learning, and fashion, with most available in .stl format, which is native to computer-aided design software, and presliced. Some files are also available in .3mf, an open-source file format developed as a universal standard for high-fidelity 3D printing.

Components of the 'ghost gun' allegedly used by Luigi Mangione were 3D printed

Although some "ghost guns" are firearms whose serial numbers have been removed, many others are built from pieces that can be printed using readily available online data files. Federal laws and some states do not prohibit the construction of these DIY firearms for personal use.

The first 3D printing patent was filed in 1967

Wyn Swainson, an English literature graduate student, filed a patent in Denmark for a system that scans an object and uses the scanning data to rebuild it using lasers that harden light-sensitive plastic. However, he never developed a working prototype. The idea originated from wanting to produce recreations of sculptures.

The benefits of 3D printing batteries, from safety to sustainability

Rather than using the liquid electrolyte commonly found in lithium-ion batteries, 3D-printed batteries would use a solid layer, which can be custom-built into different shapes, deliver higher energy density by building thinner layers, and be fabricated with fewer raw materials compared to injection molding.

3D printing has made musical instruments more accessible

Violins fabricated from durable plastic, rather than being built from wood, can cost hundreds of dollars less, allowing children to try them out without financial pressure. They can be made in colors that appeal to children, sizes tailored to their bodies, and with tactile guides to help visually impaired learners.

Within fabrication plants, it takes about three months to manufacture hundreds of microchips from a single wafer of pure silicon using light and significant quantities of electricity, water, and hazardous chemicals.

Watch the iterative process of successfully printing a slice of vegan cheesecake

3D printing food requires integrating ingredients with a variety of properties, which may not all resist the physical stress of stacking. This means successful 3D printing of food may require rethinking how ingredients are layered and modifying ratios of each, potentially sacrificing taste for structural integrity.

Many plastic products are molded from melted pellets called nurdles, which are made from ethylene and propylene extracted from crude oil.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

During manufacturing, lithium-ion and alkaline batteries are tested for short-circuiting

Lithium-ion batteries are made by manufacturing anodes, cathodes, and electrolytes via chemical processes, assembling these components into cells, and enclosing multiple interconnected cells within a protective casing. Disposable alkaline battery production involves filling steel containers with preforms—rings of powdered cathode material—paper-based separators, electrolyte solution, and an anode gel.

Massive 3D printers have been used to build homes by stacking layers of 'concrete toothpaste,' a fire-resistant material that effectively insulates against outside noise.

Laser technology powers communication, medical and manufacturing tools

Lasers are used when scanning groceries, printing documents or undergoing cosmetic procedures to enhance efficiency, precision and accuracy. Missile defense, targeting and optical communication systems have made using laser technology habitual in the military.

Particle beams can be used to alter the surface properties of artificial joints

Surface hardening and embedding specific elements or coatings can improve the biocompatibility and bone tissue integration of these implants. Particle accelerators are significant sources of the radioisotopes needed in medical diagnostics, and microwave linear accelerators are used in the majority of cancer irradiation treatments.

Lasers help build the layers of circuit components in microchips

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

View a gallery of 3D printed clothing

Many 3D printed garments represent wearable art where technology meets couture. Despite their appearances on runways since Iris van Herpen's pioneering top at Amsterdam Fashion Week in 2010, mainstream adoption has been limited due to high costs and reduced comfort when compared to fabric-based apparel.

Solar panel manufacturing begins with silicon extracted from sand

The silicon is purified and shaped into wafers less than 0.2 millimeters thick, coated and connected through a criss-cross pattern of narrow and wider metal, followed by multiple rounds of lamination before bonding to a weatherproof panel.

An integrated circuit combines major circuit components onto a single device

Before 1958, these components were fabricated separately before manual assembly, introducing human error, delays, and higher costs. The invention of the IC laid the foundation for automated manufacturing, miniaturization, and improvements to speed and energy efficiency.

Most custom earmolds for in-ear hearing aids are made using 3D printing

The technology has also been utilized for behind-the-ear and receiver-in-canal hearing aids, allowing for the creation of structures tailored to the patient's anatomy for enhanced effectiveness. 3D printing has also been used to print retinal eye cells and custom eyeglass frames.

Thingiverse is a massive free library of 3D-printable designs

The site—which was launched in 2008 by 3D-printer manufacturer MakerBot—hosts more than 2 million user-generated design files to build everything from prosthetic hands to replacement dishwasher parts (or the "Golden Snitch" from "Harry Potter). The community behind it rapidly designed and shared files for face shields and ventilator components amid the COVID-19 pandemic.

In 2015, the FDA approved the first 3D-printed prescription tablet

Spritam, an epilepsy medication, had been too large and difficult to swallow, particularly due to its inability to dissolve easily. The new pill was designed with porous layers to enhance its dissolvability, paving the way for future 3D printing of drugs.

Watch Apple Watch cases be 3D printed from titanium powder

Apple Watch Ultra 3 cases are 3D printed entirely from recycled, aerospace-grade titanium powder using lasers to fuse particles. Over 400 metric tons of raw titanium were saved in 2025, with two watches fabricated from the same amount of raw material that would have previously been used to make one.

Photolithography etches circuit components into a semiconductor wafer

A high-energy laser is fired at molten tin droplets, turning them into plasma that releases the ultraviolet light needed to burn the wafer's photoresist layer. A mask controls what parts of the wafer are etched for subsequent chemical processing.

Here's how the seven types of plastics fare in the recycling process

To help you make better-informed decisions about the products that you buy, here's a simple explanation of the seven different types of plastic, how they differ, and their impact on the environment.

While the Fed is involved in issuing new generations of cash, the way it adds to the money supply does not involve printers

The majority of money in circulation is credit, not cash. This credit, which acts similarly to direct deposit from employers, is added to bank accounts by the Federal Reserve. The Fed also employs tools like the federal funds rate and open market operations to expand or contract credit.

Watch a tour of an integrated circuit fabrication plant

Explore the protocols in place to ensure clean rooms have no dust to jeopardize the integrity of silicon wafers as they are transformed into working microchips. Layering, photolithography, etching, and chemical vapor deposition are shown alongside digital visualizations.

Alternative investments can be sorted into seven major categories, according to some experts

These categories include real estate, private equity, private debt, hedge funds, collectibles, and more.

Watch a tour of a battery manufacturing gigafactory

Inside Contemporary Amperex Technology Limited's facility, China's largest EV battery manufacturer uses slurry mixing, "jelly rolling," electrolyte injection, and other techniques and equipment to transform raw metals such as lithium and magnesium into approximately 2.2 million electrochemical cells daily.